From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
The PHY interrupt (INT_N) pin is connected to IRQ2 and IRQ7 for ETH0 and
ETH1 respectively.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
index 931efc07d6fb..49ecd33aeeb8 100644
--- a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
@@ -6,6 +6,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irqc-rzg2l.h>
#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
/ {
@@ -77,6 +78,8 @@ phy0: ethernet-phy@7 {
compatible = "ethernet-phy-id0022.1640",
"ethernet-phy-ieee802.3-c22";
reg = <7>;
+ interrupt-parent = <&irqc>;
+ interrupts = <RZG2L_IRQ2 IRQ_TYPE_LEVEL_LOW>;
rxc-skew-psec = <2400>;
txc-skew-psec = <2400>;
rxdv-skew-psec = <0>;
@@ -104,6 +107,8 @@ phy1: ethernet-phy@7 {
compatible = "ethernet-phy-id0022.1640",
"ethernet-phy-ieee802.3-c22";
reg = <7>;
+ interrupt-parent = <&irqc>;
+ interrupts = <RZG2L_IRQ7 IRQ_TYPE_LEVEL_LOW>;
rxc-skew-psec = <2400>;
txc-skew-psec = <2400>;
rxdv-skew-psec = <0>;
@@ -151,7 +156,8 @@ eth0_pins: eth0 {
<RZG2L_PORT_PINMUX(3, 2, 1)>, /* ET0_RXD0 */
<RZG2L_PORT_PINMUX(3, 3, 1)>, /* ET0_RXD1 */
<RZG2L_PORT_PINMUX(4, 0, 1)>, /* ET0_RXD2 */
- <RZG2L_PORT_PINMUX(4, 1, 1)>; /* ET0_RXD3 */
+ <RZG2L_PORT_PINMUX(4, 1, 1)>, /* ET0_RXD3 */
+ <RZG2L_PORT_PINMUX(5, 1, 7)>; /* IRQ2 */
};
eth1_pins: eth1 {
@@ -169,7 +175,8 @@ eth1_pins: eth1 {
<RZG2L_PORT_PINMUX(9, 1, 1)>, /* ET1_RXD0 */
<RZG2L_PORT_PINMUX(9, 2, 1)>, /* ET1_RXD1 */
<RZG2L_PORT_PINMUX(9, 3, 1)>, /* ET1_RXD2 */
- <RZG2L_PORT_PINMUX(10, 0, 1)>; /* ET1_RXD3 */
+ <RZG2L_PORT_PINMUX(10, 0, 1)>, /* ET1_RXD3 */
+ <RZG2L_PORT_PINMUX(18, 5, 1)>; /* IRQ7 */
};
sdhi0_emmc_pins: sd0emmc {
--
2.25.1
