Hi Hervé,
On Mon, Nov 7, 2022 at 3:00 PM Herve Codina <herve.codina@xxxxxxxxxxx> wrote:
> Add support for the Renesas USBF controller.
> This controller is an USB2.0 UDC controller available in the
> Renesas r9a06g032 SoC (RZ/N1 family).
>
> Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx>
> --- /dev/null
> +++ b/drivers/usb/gadget/udc/renesas_usbf.c
> +struct usbf_udc {
> + struct usb_gadget gadget;
> + struct usb_gadget_driver *driver;
> + struct device *dev;
> + struct clk_bulk_data *clocks;
> + int nclocks;
> + void __iomem *regs;
> + spinlock_t lock;
> + bool is_remote_wakeup;
> + bool is_usb_suspended;
> + struct usbf_ep ep[USBF_NUM_ENDPOINTS];
> + /* for EP0 control messages */
> + enum usbf_ep0state ep0state;
> + struct usbf_req setup_reply;
> + u8 ep0_buf[USBF_EP0_MAX_PCKT_SIZE];
> +};
> +static int usbf_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct usbf_udc *udc;
> + struct usbf_ep *ep;
> + bool h2mode;
> + int irq;
> + int ret;
> + int i;
> +
> + ret = r9a06g032_sysctrl_get_usb_h2mode(&h2mode);
> + if (ret)
> + return ret;
> + if (h2mode) {
> + dev_warn(dev, "Disabled in H2 (host) mode\n");
> + return -ENODEV;
> + }
> +
> + udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL);
> + if (!udc)
> + return -ENOMEM;
> + platform_set_drvdata(pdev, udc);
> +
> + udc->dev = dev;
> + spin_lock_init(&udc->lock);
> +
> + udc->regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(udc->regs))
> + return PTR_ERR(udc->regs);
> +
> + devm_pm_runtime_enable(&pdev->dev);
> + ret = pm_runtime_resume_and_get(&pdev->dev);
> + if (ret < 0)
> + return ret;
> +
> + ret = devm_clk_bulk_get_all(dev, &udc->clocks);
> + if (ret < 1) {
> + dev_err(dev, "failed to get clocks %d\n", ret);
> + return ret;
> + }
> + udc->nclocks = ret;
> +
> + ret = clk_bulk_prepare_enable(udc->nclocks, udc->clocks);
> + if (ret) {
> + dev_err(dev, "can not enable the clock\n");
> + return ret;
> + }
As this driver only enables/disables the clocks, perhaps you could
just delegate this to Runtime PM (through the clock domain pointed
by the power-domains property in DT), and drop the .clocks and
.nclocks fields?
> +clk_disable:
> + clk_bulk_disable_unprepare(udc->nclocks, udc->clocks);
> + return ret;
> +}
> +
> +static int usbf_remove(struct platform_device *pdev)
> +{
> + struct usbf_udc *udc = platform_get_drvdata(pdev);
> +
> + usb_del_gadget_udc(&udc->gadget);
> +
> + clk_bulk_disable_unprepare(udc->nclocks, udc->clocks);
> +
> + pm_runtime_put(&pdev->dev);
> +
> + return 0;
> +}
> +MODULE_AUTHOR("Herve Codina <herve.codina@xxxxxxxxxxx>");
Hervé? ;-)
> +MODULE_DESCRIPTION("Renesas R-Car Gen3 & RZ/N1 USB Function driver");
> +MODULE_LICENSE("GPL");
> --
> 2.37.3
>
--
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
