On Sun, Oct 30, 2022 at 08:02:10AM +0800, Guo Ren wrote: > On Sun, Oct 30, 2022 at 3:11 AM Lad, Prabhakar > <prabhakar.csengg@xxxxxxxxx> wrote: > > > > Hi Guo, > > > > Thank you for the review. > > > > On Sat, Oct 29, 2022 at 5:25 AM Guo Ren <guoren@xxxxxxxxxx> wrote: > > > > > > On Sat, Oct 29, 2022 at 12:59 AM Prabhakar <prabhakar.csengg@xxxxxxxxx> wrote: > > > > > > > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> > > > > > > > > Add initial device tree for Renesas RZ/Five RISC-V CPU Core (AX45MP > > > > Single). > > > > > > > > RZ/Five SoC is almost identical to RZ/G2UL Type-1 SoC (ARM64) hence we > > > > will be reusing r9a07g043.dtsi [0] as a base DTSI for both the SoC's. > > > > r9a07g043f.dtsi includes RZ/Five SoC specific blocks. > > > > > > > > Below are the RZ/Five SoC specific blocks added in the initial DTSI which > > > > can be used to boot via initramfs on RZ/Five SMARC EVK: > > > > - AX45MP CPU > > > > - PLIC > > > > > > > > [0] arch/arm64/boot/dts/renesas/r9a07g043.dtsi > > > > > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> > > > > --- > > > > v4 -> v5 > > > > * Fixed riscv,ndev value (should be 511) > > > > * Reworked completely (sort of new patch) > > > > > > > > v3 -> v4 > > > > * No change > > > > > > > > v2 -> v3 > > > > * Fixed clock entry for CPU core > > > > * Fixed timebase frequency to 12MHz > > > > * Fixed sorting of the nodes > > > > * Included RB tags > > > > > > > > v1 -> v2 > > > > * Dropped including makefile change > > > > * Updated ndev count > > > > --- > > > > arch/riscv/boot/dts/renesas/r9a07g043f.dtsi | 57 +++++++++++++++++++++ > > > > 1 file changed, 57 insertions(+) > > > > create mode 100644 arch/riscv/boot/dts/renesas/r9a07g043f.dtsi > > > > > > > > diff --git a/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi b/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi > > > > new file mode 100644 > > > > index 000000000000..50134be548f5 > > > > --- /dev/null > > > > +++ b/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi > > > > @@ -0,0 +1,57 @@ > > > > +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > > +/* > > > > + * Device Tree Source for the RZ/Five SoC > > > > + * > > > > + * Copyright (C) 2022 Renesas Electronics Corp. > > > > + */ > > > > + > > > > +#include <dt-bindings/interrupt-controller/irq.h> > > > > + > > > > +#define SOC_PERIPHERAL_IRQ(nr) (nr + 32) > > > > + > > > > +#include <arm64/renesas/r9a07g043.dtsi> > > > The initial patch shouldn't be broken. Combine them together with the > > > minimal components and add others late. Don't separate the DTS files. > > > > > r9a07g043.dtsi [0] already exists in the kernel. r9a07g043.dtsi is > > shared with the RZ/G2UL SoC (ARM64) and the RZ/Five SoC. There are two > > more patches [1] which are required and are currently queued up in the > > Renesas tree for v6.2 (Ive mentioned the dependencies in the cover > > letter). > > You could just move the below part to the second dtsi patch. Then > compile won't be broken. > > clocks = <&cpg CPG_MOD R9A07G043_NCEPLIC_ACLK>; > power-domains = <&cpg>; > resets = <&cpg R9A07G043_NCEPLIC_ARESETN>; The makefile for this directory is not added until the next patch right? The compile shouldn't be broken here since it therefore cannot be compiled? Slightly confused, Conor. > > > > > [0] arch/arm64/boot/dts/renesas/r9a07g043.dtsi > > [1] https://patchwork.kernel.org/project/linux-renesas-soc/cover/20221025220629.79321-1-prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx/ > > > > > > + > > > > +/ { > > > > + cpus { > > > > + #address-cells = <1>; > > > > + #size-cells = <0>; > > > > + timebase-frequency = <12000000>; > > > > + > > > > + cpu0: cpu@0 { > > > > + compatible = "andestech,ax45mp", "riscv"; > > > > + device_type = "cpu"; > > > > + reg = <0x0>; > > > > + status = "okay"; > > > > + riscv,isa = "rv64imafdc"; > > > > + mmu-type = "riscv,sv39"; > > > > + i-cache-size = <0x8000>; > > > > + i-cache-line-size = <0x40>; > > > > + d-cache-size = <0x8000>; > > > > + d-cache-line-size = <0x40>; > > > > + clocks = <&cpg CPG_CORE R9A07G043_CLK_I>; > > > > + > > > > + cpu0_intc: interrupt-controller { > > > > + #interrupt-cells = <1>; > > > > + compatible = "riscv,cpu-intc"; > > > > + interrupt-controller; > > > > + }; > > > > + }; > > > > + }; > > > > +}; > > > > + > > > > +&soc { > > > > + interrupt-parent = <&plic>; > > > > + > > > > + plic: interrupt-controller@12c00000 { > > > > + compatible = "renesas,r9a07g043-plic", "andestech,nceplic100"; > > > > + #interrupt-cells = <2>; > > > > + #address-cells = <0>; > > > > + riscv,ndev = <511>; > > > > + interrupt-controller; > > > > + reg = <0x0 0x12c00000 0 0x400000>; > > > > + clocks = <&cpg CPG_MOD R9A07G043_NCEPLIC_ACLK>; > > > > + power-domains = <&cpg>; > > > > + resets = <&cpg R9A07G043_NCEPLIC_ARESETN>; > > > Ditto, Where is cpg? in r9a07g043.dtsi? > > > > > Yes CPG node is in r9a07g043.dtsi. > > > > Cheers, > > Prabhakar > > > > -- > Best Regards > Guo Ren
