Re: [PATCH 6/6] can: rcar_canfd: Add has_gerfl_eef to struct rcar_canfd_hw_info

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Biju,

On Sat, Oct 22, 2022 at 1:03 PM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> R-Car has ECC error flags in global error interrupts whereas it is
> not available on RZ/G2L.
>
> Add has_gerfl_eef to struct rcar_canfd_hw_info so that rcar_canfd_
> global_error() will process ECC errors only for R-Car.
>
> whilst, this patch fixes the below checkpatch warnings
>   CHECK: Unnecessary parentheses around 'ch == 0'
>   CHECK: Unnecessary parentheses around 'ch == 1'
>
> Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>

Thanks for your patch!

> --- a/drivers/net/can/rcar/rcar_canfd.c
> +++ b/drivers/net/can/rcar/rcar_canfd.c
> @@ -523,6 +523,7 @@ struct rcar_canfd_hw_info {
>         unsigned multi_global_irqs:1;   /* Has multiple global irqs  */
>         unsigned clk_postdiv:1;         /* Has CAN clk post divider  */
>         unsigned multi_channel_irqs:1;  /* Has multiple channel irqs  */
> +       unsigned has_gerfl_eef:1;       /* Has ECC Error Flag  */

Do you really need this flag? According to the RZ/G2L docs, the
corresponding register bits are always read as zero.

>  };
>
>  /* Channel priv data */

> @@ -947,17 +950,18 @@ static void rcar_canfd_global_error(struct net_device *ndev)
>  {
>         struct rcar_canfd_channel *priv = netdev_priv(ndev);
>         struct rcar_canfd_global *gpriv = priv->gpriv;
> +       const struct rcar_canfd_hw_info *info = gpriv->info;
>         struct net_device_stats *stats = &ndev->stats;
>         u32 ch = priv->channel;
>         u32 gerfl, sts;
>         u32 ridx = ch + RCANFD_RFFIFO_IDX;
>
>         gerfl = rcar_canfd_read(priv->base, RCANFD_GERFL);
> -       if ((gerfl & RCANFD_GERFL_EEF0) && (ch == 0)) {
> +       if (info->has_gerfl_eef && (gerfl & RCANFD_GERFL_EEF0) && ch == 0) {
>                 netdev_dbg(ndev, "Ch0: ECC Error flag\n");
>                 stats->tx_dropped++;
>         }
> -       if ((gerfl & RCANFD_GERFL_EEF1) && (ch == 1)) {
> +       if (info->has_gerfl_eef && (gerfl & RCANFD_GERFL_EEF1) && ch == 1) {
>                 netdev_dbg(ndev, "Ch1: ECC Error flag\n");
>                 stats->tx_dropped++;
>         }

Just wrap both checks inside a single "if (gpriv->info->has_gerfl) { ... }"?

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux