We are seeing IRQ storm on global receive IRQ line under heavy CAN
bus load conditions with both CAN channels are enabled.
Conditions:
The global receive IRQ line is shared between can0 and can1, either
of the channels can trigger interrupt while the other channel irq
line is disabled(rfie).
When global receive IRQ interrupt occurs, we mask the interrupt in
irqhandler. Clearing and unmasking of the interrupt is happening in
rx_poll(). There is a race condition where rx_poll unmask the
interrupt, but the next irq handler does not mask the irq due to
NAPIF_STATE_MISSED flag(for eg: can0 rx fifo interrupt enable is
disabled and can1 is triggering rx interrupt, the delay in rx_poll()
processing results in setting NAPIF_STATE_MISSED flag) leading to IRQ
storm.
This patch fixes the issue by checking irq is masked or not in
irq handler and it masks the interrupt if it is unmasked.
Fixes: dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver")
Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
---
drivers/net/can/rcar/rcar_canfd.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
index 567620d215f8..1a3ae0b232c9 100644
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -1157,7 +1157,7 @@ static void rcar_canfd_handle_global_receive(struct rcar_canfd_global *gpriv, u3
{
struct rcar_canfd_channel *priv = gpriv->ch[ch];
u32 ridx = ch + RCANFD_RFFIFO_IDX;
- u32 sts;
+ u32 sts, rfie;
/* Handle Rx interrupts */
sts = rcar_canfd_read(priv->base, RCANFD_RFSTS(gpriv, ridx));
@@ -1168,6 +1168,14 @@ static void rcar_canfd_handle_global_receive(struct rcar_canfd_global *gpriv, u3
RCANFD_RFCC(gpriv, ridx),
RCANFD_RFCC_RFIE);
__napi_schedule(&priv->napi);
+ } else {
+ rfie = rcar_canfd_read(priv->base,
+ RCANFD_RFCC(gpriv, ridx));
+ if (rfie & RCANFD_RFCC_RFIE)
+ /* Disable Rx FIFO interrupts */
+ rcar_canfd_clear_bit(priv->base,
+ RCANFD_RFCC(gpriv, ridx),
+ RCANFD_RFCC_RFIE);
}
}
}
--
2.25.1
