Add device nodes for the remaining High Speed Serial Communication Interfaces with FIFO (HSCIF) on the Renesas R-Car V4H (R8A779G0) SoC, including DMA support. Reformat the existing HSCIF0 node for consistency. Based on patches in the BSP by Takeshi Kihara and Vinh Nguyen. Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> --- v3: - No changes, v2: - Replace S0D3_PER by SASYNCPERD1, as per R-Car V4H Hardware User's Manual rev. 0.54. --- arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 56 +++++++++++++++++++++-- 1 file changed, 53 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi index 8023bada93493100..8141ffc38a08301d 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi @@ -355,9 +355,8 @@ i2c5: i2c@e66e0000 { hscif0: serial@e6540000 { compatible = "renesas,hscif-r8a779g0", - "renesas,rcar-gen4-hscif", - "renesas,hscif"; - reg = <0 0xe6540000 0 96>; + "renesas,rcar-gen4-hscif", "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 514>, <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>, @@ -371,6 +370,57 @@ hscif0: serial@e6540000 { status = "disabled"; }; + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a779g0", + "renesas,rcar-gen4-hscif", "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 515>, + <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x33>, <&dmac0 0x32>, + <&dmac1 0x33>, <&dmac1 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 515>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a779g0", + "renesas,rcar-gen4-hscif", "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x35>, <&dmac0 0x34>, + <&dmac1 0x35>, <&dmac1 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 516>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a779g0", + "renesas,rcar-gen4-hscif", "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>, + <&dmac1 0x37>, <&dmac1 0x36>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + avb0: ethernet@e6800000 { compatible = "renesas,etheravb-r8a779g0", "renesas,etheravb-rcar-gen4"; -- 2.25.1