As serial communication requires a clock signal, the High Speed Serial
Communication Interfaces with FIFO (HSCIF) must be clocked by a clock
that is not affected by Spread Spectrum or Fractional Multiplication.
Hence change the parent clocks for the HSCIF modules from the S0D3_PER
clock to the SASYNCPERD1 clock (which has the same clock rate), cfr.
R-Car V4H Hardware User's Manual rev. 0.54.
Fixes: 0ab55cf1834177a2 ("clk: renesas: cpg-mssr: Add support for R-Car V4H")
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
drivers/clk/renesas/r8a779g0-cpg-mssr.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/renesas/r8a779g0-cpg-mssr.c b/drivers/clk/renesas/r8a779g0-cpg-mssr.c
index 51491b94a057b5a7..f1f0496f7605f554 100644
--- a/drivers/clk/renesas/r8a779g0-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a779g0-cpg-mssr.c
@@ -158,10 +158,10 @@ static const struct mssr_mod_clk r8a779g0_mod_clks[] __initconst = {
DEF_MOD("avb0", 211, R8A779G0_CLK_S0D4_HSC),
DEF_MOD("avb1", 212, R8A779G0_CLK_S0D4_HSC),
DEF_MOD("avb2", 213, R8A779G0_CLK_S0D4_HSC),
- DEF_MOD("hscif0", 514, R8A779G0_CLK_S0D3_PER),
- DEF_MOD("hscif1", 515, R8A779G0_CLK_S0D3_PER),
- DEF_MOD("hscif2", 516, R8A779G0_CLK_S0D3_PER),
- DEF_MOD("hscif3", 517, R8A779G0_CLK_S0D3_PER),
+ DEF_MOD("hscif0", 514, R8A779G0_CLK_SASYNCPERD1),
+ DEF_MOD("hscif1", 515, R8A779G0_CLK_SASYNCPERD1),
+ DEF_MOD("hscif2", 516, R8A779G0_CLK_SASYNCPERD1),
+ DEF_MOD("hscif3", 517, R8A779G0_CLK_SASYNCPERD1),
DEF_MOD("i2c0", 518, R8A779G0_CLK_S0D6_PER),
DEF_MOD("i2c1", 519, R8A779G0_CLK_S0D6_PER),
DEF_MOD("i2c2", 520, R8A779G0_CLK_S0D6_PER),
--
2.25.1
