On Fri, 30 Sep 2022, Rob Herring wrote: > On Thu, Sep 29, 2022 at 06:53:49PM +0100, Lee Jones wrote: > > On Thu, 29 Sep 2022, Biju Das wrote: > > > > > The RZ/G2L multi-function timer pulse unit 3 (MTU3a) is embedded in > > > the Renesas RZ/G2L family SoC's. It consists of eight 16-bit timer > > > channels and one 32-bit timer channel. It supports the following > > > functions > > > - Counter > > > - Timer > > > - PWM > > > > > > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> > > > --- > > > It is same as [1]. Just sending this patch to avoid any bot error for > > > the subsequent patches. > > > [1] https://patchwork.kernel.org/project/linux-renesas-soc/patch/20220926132114.60396-3-biju.das.jz@xxxxxxxxxxxxxx/ > > > --- > > > .../bindings/mfd/renesas,rzg2l-mtu3.yaml | 275 ++++++++++++++++++ > > > 1 file changed, 275 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/mfd/renesas,rzg2l-mtu3.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/mfd/renesas,rzg2l-mtu3.yaml b/Documentation/devicetree/bindings/mfd/renesas,rzg2l-mtu3.yaml > > > new file mode 100644 > > > index 000000000000..c1fae8e8d9f9 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/mfd/renesas,rzg2l-mtu3.yaml > > > @@ -0,0 +1,275 @@ > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/mfd/renesas,rzg2l-mtu3.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Renesas RZ/G2L Multi-Function Timer Pulse Unit 3 (MTU3a) bindings > > > + > > > +maintainers: > > > + - Biju Das <biju.das.jz@xxxxxxxxxxxxxx> > > > + > > > +description: | > > > + This hardware block pconsisting of eight 16-bit timer channels and one > > > + 32- bit timer channel. It supports the following specifications: > > > + - Pulse input/output: 28 lines max. > > > + - Pulse input 3 lines > > > + - Count clock 11 clocks for each channel (14 clocks for MTU0, 12 clocks > > > + for MTU2, and 10 clocks for MTU5, four clocks for MTU1-MTU2 combination > > > + (when LWA = 1)) > > > + - Operating frequency Up to 100 MHz > > > + - Available operations [MTU0 to MTU4, MTU6, MTU7, and MTU8] > > > + - Waveform output on compare match > > > + - Input capture function (noise filter setting available) > > > + - Counter-clearing operation > > > + - Simultaneous writing to multiple timer counters (TCNT) > > > + (excluding MTU8). > > > + - Simultaneous clearing on compare match or input capture > > > + (excluding MTU8). > > > + - Simultaneous input and output to registers in synchronization with > > > + counter operations (excluding MTU8). > > > + - Up to 12-phase PWM output in combination with synchronous operation > > > + (excluding MTU8) > > > + - [MTU0 MTU3, MTU4, MTU6, MTU7, and MTU8] > > > + - Buffer operation specifiable > > > + - [MTU1, MTU2] > > > + - Phase counting mode can be specified independently > > > + - 32-bit phase counting mode can be specified for interlocked operation > > > + of MTU1 and MTU2 (when TMDR3.LWA = 1) > > > + - Cascade connection operation available > > > + - [MTU3, MTU4, MTU6, and MTU7] > > > + - Through interlocked operation of MTU3/4 and MTU6/7, the positive and > > > + negative signals in six phases (12 phases in total) can be output in > > > + complementary PWM and reset-synchronized PWM operation. > > > + - In complementary PWM mode, values can be transferred from buffer > > > + registers to temporary registers at crests and troughs of the timer- > > > + counter values or when the buffer registers (TGRD registers in MTU4 > > > + and MTU7) are written to. > > > + - Double-buffering selectable in complementary PWM mode. > > > + - [MTU3 and MTU4] > > > + - Through interlocking with MTU0, a mode for driving AC synchronous > > > + motors (brushless DC motors) by using complementary PWM output and > > > + reset-synchronized PWM output is settable and allows the selection > > > + of two types of waveform output (chopping or level). > > > + - [MTU5] > > > + - Capable of operation as a dead-time compensation counter. > > > + - [MTU0/MTU5, MTU1, MTU2, and MTU8] > > > + - 32-bit phase counting mode specifiable by combining MTU1 and MTU2 and > > > + through interlocked operation with MTU0/MTU5 and MTU8. > > > + - Interrupt-skipping function > > > + - In complementary PWM mode, interrupts on crests and troughs of counter > > > + values and triggers to start conversion by the A/D converter can be > > > + skipped. > > > + - Interrupt sources: 43 sources. > > > + - Buffer operation: > > > + - Automatic transfer of register data (transfer from the buffer > > > + register to the timer register). > > > + - Trigger generation > > > + - A/D converter start triggers can be generated > > > + - A/D converter start request delaying function enables A/D converter > > > + to be started with any desired timing and to be synchronized with > > > + PWM output. > > > + - Low power consumption function > > > + - The MTU3a can be placed in the module-stop state. > > > + > > > +properties: > > > + compatible: > > > + items: > > > + - enum: > > > + - renesas,r9a07g044-mtu3 # RZ/G2{L,LC} > > > + - renesas,r9a07g054-mtu3 # RZ/V2L > > > + - const: renesas,rzg2l-mtu3 > > > + > > > + reg: > > > + maxItems: 1 > > > + > > > + interrupts: > > > + items: > > > + - description: MTU0.TGRA input capture/compare match > > > + - description: MTU0.TGRB input capture/compare match > > > + - description: MTU0.TGRC input capture/compare match > > > + - description: MTU0.TGRD input capture/compare match > > > + - description: MTU0.TCNT overflow > > > + - description: MTU0.TGRE compare match > > > + - description: MTU0.TGRF compare match > > > + - description: MTU1.TGRA input capture/compare match > > > + - description: MTU1.TGRB input capture/compare match > > > + - description: MTU1.TCNT overflow > > > + - description: MTU1.TCNT underflow > > > + - description: MTU2.TGRA input capture/compare match > > > + - description: MTU2.TGRB input capture/compare match > > > + - description: MTU2.TCNT overflow > > > + - description: MTU2.TCNT underflow > > > + - description: MTU3.TGRA input capture/compare match > > > + - description: MTU3.TGRB input capture/compare match > > > + - description: MTU3.TGRC input capture/compare match > > > + - description: MTU3.TGRD input capture/compare match > > > + - description: MTU3.TCNT overflow > > > + - description: MTU4.TGRA input capture/compare match > > > + - description: MTU4.TGRB input capture/compare match > > > + - description: MTU4.TGRC input capture/compare match > > > + - description: MTU4.TGRD input capture/compare match > > > + - description: MTU4.TCNT overflow/underflow > > > + - description: MTU5.TGRU input capture/compare match > > > + - description: MTU5.TGRV input capture/compare match > > > + - description: MTU5.TGRW input capture/compare match > > > + - description: MTU6.TGRA input capture/compare match > > > + - description: MTU6.TGRB input capture/compare match > > > + - description: MTU6.TGRC input capture/compare match > > > + - description: MTU6.TGRD input capture/compare match > > > + - description: MTU6.TCNT overflow > > > + - description: MTU7.TGRA input capture/compare match > > > + - description: MTU7.TGRB input capture/compare match > > > + - description: MTU7.TGRC input capture/compare match > > > + - description: MTU7.TGRD input capture/compare match > > > + - description: MTU7.TCNT overflow/underflow > > > + - description: MTU8.TGRA input capture/compare match > > > + - description: MTU8.TGRB input capture/compare match > > > + - description: MTU8.TGRC input capture/compare match > > > + - description: MTU8.TGRD input capture/compare match > > > + - description: MTU8.TCNT overflow > > > + - description: MTU8.TCNT underflow > > > + > > > + interrupt-names: > > > + items: > > > + - const: tgia0 > > > + - const: tgib0 > > > + - const: tgic0 > > > + - const: tgid0 > > > + - const: tgiv0 > > > + - const: tgie0 > > > + - const: tgif0 > > > + - const: tgia1 > > > + - const: tgib1 > > > + - const: tgiv1 > > > + - const: tgiu1 > > > + - const: tgia2 > > > + - const: tgib2 > > > + - const: tgiv2 > > > + - const: tgiu2 > > > + - const: tgia3 > > > + - const: tgib3 > > > + - const: tgic3 > > > + - const: tgid3 > > > + - const: tgiv3 > > > + - const: tgia4 > > > + - const: tgib4 > > > + - const: tgic4 > > > + - const: tgid4 > > > + - const: tgiv4 > > > + - const: tgiu5 > > > + - const: tgiv5 > > > + - const: tgiw5 > > > + - const: tgia6 > > > + - const: tgib6 > > > + - const: tgic6 > > > + - const: tgid6 > > > + - const: tgiv6 > > > + - const: tgia7 > > > + - const: tgib7 > > > + - const: tgic7 > > > + - const: tgid7 > > > + - const: tgiv7 > > > + - const: tgia8 > > > + - const: tgib8 > > > + - const: tgic8 > > > + - const: tgid8 > > > + - const: tgiv8 > > > + - const: tgiu8 > > > + > > > + clocks: > > > + maxItems: 1 > > > + > > > + power-domains: > > > + maxItems: 1 > > > + > > > + resets: > > > + maxItems: 1 > > > + > > > + "#address-cells": > > > + const: 1 > > > + > > > + "#size-cells": > > > + const: 0 > > > + > > > +required: > > > + - compatible > > > + - reg > > > + - interrupts > > > + - interrupt-names > > > + - clocks > > > + - power-domains > > > + - resets > > > + > > > +additionalProperties: false > > > + > > > +examples: > > > + - | > > > + #include <dt-bindings/clock/r9a07g044-cpg.h> > > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > > + > > > + mtu3: timer@10001200 { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + compatible = "renesas,r9a07g044-mtu3", "renesas,rzg2l-mtu3"; > > > + reg = <0x10001200 0xb00>; > > > + interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 173 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 181 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 185 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 186 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 192 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 201 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 202 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 207 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>, > > > + <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>; > > > + interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", "tgiv0", "tgie0", > > > + "tgif0", > > > + "tgia1", "tgib1", "tgiv1", "tgiu1", > > > + "tgia2", "tgib2", "tgiv2", "tgiu2", > > > + "tgia3", "tgib3", "tgic3", "tgid3", "tgiv3", > > > + "tgia4", "tgib4", "tgic4", "tgid4", "tgiv4", > > > + "tgiu5", "tgiv5", "tgiw5", > > > + "tgia6", "tgib6", "tgic6", "tgid6", "tgiv6", > > > + "tgia7", "tgib7", "tgic7", "tgid7", "tgiv7", > > > + "tgia8", "tgib8", "tgic8", "tgid8", "tgiv8", "tgiu8"; > > > > Not sure you need to list all of the IRQs in the example. > > You do, because that's what the schema says is valid. You have to use the exhaustive list? -- Lee Jones [李琼斯]
