[PATCH v6 07/10] PCI: dwc: Avoid reading a register to detect whether eDMA exists

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Since reading value of PCIE_DMA_VIEWPORT_BASE + PCIE_DMA_CTRL was
0x00000000 on one of SoCs (R-Car S4-8), it cannot find the eDMA.
So, directly read the eDMA register if edma.reg_base is not zero.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-designware.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 72f9620a374d..08f91a6bbe4b 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -844,8 +844,7 @@ static int dw_pcie_edma_find_chip(struct dw_pcie *pci)
 {
 	u32 val;
 
-	val = dw_pcie_readl_dbi(pci, PCIE_DMA_VIEWPORT_BASE + PCIE_DMA_CTRL);
-	if (val == 0xFFFFFFFF && pci->edma.reg_base) {
+	if (pci->edma.reg_base) {
 		pci->edma.mf = EDMA_MF_EDMA_UNROLL;
 
 		val = dw_pcie_readl_dma(pci, PCIE_DMA_CTRL);
@@ -853,6 +852,7 @@ static int dw_pcie_edma_find_chip(struct dw_pcie *pci)
 		pci->edma.mf = EDMA_MF_EDMA_LEGACY;
 
 		pci->edma.reg_base = pci->dbi_base + PCIE_DMA_VIEWPORT_BASE;
+		val = dw_pcie_readl_dbi(pci, PCIE_DMA_VIEWPORT_BASE + PCIE_DMA_CTRL);
 	} else {
 		return -ENODEV;
 	}
-- 
2.25.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux