Re: [PATCH v2 4/8] dt-bindings: net: renesas: Document Renesas Ethernet Switch

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 21/09/2022 10:47, Yoshihiro Shimoda wrote:
> Document Renesas Etherent Switch for R-Car S4-8 (r8a779f0).
> 
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> ---
>  .../bindings/net/renesas,etherswitch.yaml     | 286 ++++++++++++++++++
>  1 file changed, 286 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/renesas,etherswitch.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/renesas,etherswitch.yaml b/Documentation/devicetree/bindings/net/renesas,etherswitch.yaml
> new file mode 100644
> index 000000000000..988d14f5c54e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/renesas,etherswitch.yaml

Isn't dsa directory for this?

> @@ -0,0 +1,286 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/renesas,etherswitch.yaml#

Filename: renesas,r8a779f0-ether-switch.yaml

> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas Ethernet Switch
> +
> +maintainers:
> +  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: renesas,r8a779f0-ether-switch
> +
> +  reg:
> +    maxItems: 2
> +
> +  reg-names:
> +    items:
> +      - const: base
> +      - const: secure_base
> +
> +  interrupts:
> +    maxItems: 47
> +
> +  interrupt-names:
> +    items:
> +      - const: mfwd_error
> +      - const: race_error
> +      - const: coma_error
> +      - const: gwca0_error
> +      - const: gwca1_error
> +      - const: etha0_error
> +      - const: etha1_error
> +      - const: etha2_error
> +      - const: gptp0_status
> +      - const: gptp1_status
> +      - const: mfwd_status
> +      - const: race_status
> +      - const: coma_status
> +      - const: gwca0_status
> +      - const: gwca1_status
> +      - const: etha0_status
> +      - const: etha1_status
> +      - const: etha2_status
> +      - const: rmac0_status
> +      - const: rmac1_status
> +      - const: rmac2_status
> +      - const: gwca0_rxtx0
> +      - const: gwca0_rxtx1
> +      - const: gwca0_rxtx2
> +      - const: gwca0_rxtx3
> +      - const: gwca0_rxtx4
> +      - const: gwca0_rxtx5
> +      - const: gwca0_rxtx6
> +      - const: gwca0_rxtx7
> +      - const: gwca1_rxtx0
> +      - const: gwca1_rxtx1
> +      - const: gwca1_rxtx2
> +      - const: gwca1_rxtx3
> +      - const: gwca1_rxtx4
> +      - const: gwca1_rxtx5
> +      - const: gwca1_rxtx6
> +      - const: gwca1_rxtx7
> +      - const: gwca0_rxts0
> +      - const: gwca0_rxts1
> +      - const: gwca1_rxts0
> +      - const: gwca1_rxts1
> +      - const: rmac0_mdio
> +      - const: rmac1_mdio
> +      - const: rmac2_mdio
> +      - const: rmac0_phy
> +      - const: rmac1_phy
> +      - const: rmac2_phy
> +
> +  clocks:
> +    maxItems: 2
> +
> +  clock-names:
> +    items:
> +      - const: fck
> +      - const: tsn
> +
> +  resets:
> +    maxItems: 2
> +
> +  reset-names:
> +    items:
> +      - const: rswitch2
> +      - const: tsn
> +
> +  iommus:
> +    maxItems: 16
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  ethernet-ports:
> +    type: object
> +
> +    properties:
> +      '#address-cells':
> +        description: Port number of ETHA (TSNA).
> +        const: 1

Blank line

> +      '#size-cells':
> +        const: 0
> +
> +    additionalProperties: false

Don't put it between properties. For nested object usually this is
before properties:

> +
> +    patternProperties:
> +      "^port@[0-9a-f]+$":
> +        type: object
> +

Skip blank line.

> +        $ref: "/schemas/net/ethernet-controller.yaml#"

No need for quotes.

> +        unevaluatedProperties: false
> +
> +        properties:
> +          reg:
> +            description:
> +              Port number of ETHA (TSNA).
> +
> +          phy-handle:
> +            description:
> +              Phandle of an Ethernet PHY.

Why do you need to mention this property? Isn't it coming from
ethernet-controller.yaml?

> +
> +          phy-mode:
> +            description:
> +              This specifies the interface used by the Ethernet PHY.
> +            enum:
> +              - mii
> +              - sgmii
> +              - usxgmii
> +
> +          phys:
> +            maxItems: 1
> +            description:
> +              Phandle of an Ethernet SERDES.

This is getting confusing. You have now:
- phy-handle
- phy
- phy-device
- phys
in one schema... although lan966x serdes seems to do the same. :/

> +
> +          mdio:
> +            $ref: "/schemas/net/mdio.yaml#"

No need for quotes. Are you sure this is property of each port? I don't
know the net/ethernet bindings that good, so I need to ask sometimes
basic questions. Other bindings seem to do it differently a bit.

> +            unevaluatedProperties: false
> +
> +        required:
> +          - phy-handle
> +          - phy-mode
> +          - phys
> +          - mdio
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - interrupts
> +  - interrupt-names
> +  - clocks
> +  - clock-names
> +  - resets
> +  - power-domains
> +  - ethernet-ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/power/r8a779f0-sysc.h>
> +
> +    ethernet@e6880000 {
> +            compatible = "renesas,r8a779f0-ether-switch";

Wrong indentation. Use 4 spaces.

> +            reg = <0xe6880000 0x20000>, <0xe68c0000 0x20000>;
> +            reg-names = "base", "secure_base";
> +            interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
Best regards,
Krzysztof




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux