Add Renesas Ethernet SERDES driver for R-Car S4-8 (r8a779f0).
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
drivers/phy/renesas/Kconfig | 7 +
drivers/phy/renesas/Makefile | 2 +-
drivers/phy/renesas/r8a779f0-ether-serdes.c | 303 ++++++++++++++++++++
3 files changed, 311 insertions(+), 1 deletion(-)
create mode 100644 drivers/phy/renesas/r8a779f0-ether-serdes.c
diff --git a/drivers/phy/renesas/Kconfig b/drivers/phy/renesas/Kconfig
index 111bdcae775c..68f160b0e8ef 100644
--- a/drivers/phy/renesas/Kconfig
+++ b/drivers/phy/renesas/Kconfig
@@ -32,3 +32,10 @@ config PHY_RCAR_GEN3_USB3
select GENERIC_PHY
help
Support for USB 3.0 PHY found on Renesas R-Car generation 3 SoCs.
+
+config PHY_R8A779F0_ETHERNET_SERDES
+ tristate "Renesas R-Car S4-8 Ethernet SERDES driver"
+ depends on ARCH_RENESAS || COMPILE_TEST
+ select GENERIC_PHY
+ help
+ Support for Ethernet SERDES found on Renesas R-Car S4-8 SoCs.
diff --git a/drivers/phy/renesas/Makefile b/drivers/phy/renesas/Makefile
index b599ff8a4349..a2db7125da19 100644
--- a/drivers/phy/renesas/Makefile
+++ b/drivers/phy/renesas/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PHY_R8A779F0_ETHERNET_SERDES) += r8a779f0-ether-serdes.o
obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
obj-$(CONFIG_PHY_RCAR_GEN3_PCIE) += phy-rcar-gen3-pcie.o
obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o
-obj-$(CONFIG_PHY_RCAR_GEN3_USB3) += phy-rcar-gen3-usb3.o
diff --git a/drivers/phy/renesas/r8a779f0-ether-serdes.c b/drivers/phy/renesas/r8a779f0-ether-serdes.c
new file mode 100644
index 000000000000..1aaf70b3ed3d
--- /dev/null
+++ b/drivers/phy/renesas/r8a779f0-ether-serdes.c
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Renesas Ethernet SERDES device driver
+ *
+ * Copyright (C) 2022 Renesas Electronics Corporation
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/phy.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define R8A779F0_ETH_SERDES_NUM 3
+#define R8A779F0_ETH_SERDES_OFFSET 0x0400
+#define R8A779F0_ETH_SERDES_BANK_SELECT 0x03fc
+#define R8A779F0_ETH_SERDES_TIMEOUT_US 100000
+
+struct r8a779f0_eth_serdes_channel {
+ struct phy *phy;
+ void __iomem *addr;
+ void __iomem *addr0;
+ phy_interface_t phy_interface;
+ int speed;
+};
+
+struct r8a779f0_eth_serdes_drv_data {
+ void __iomem *addr;
+ struct platform_device *pdev;
+ struct r8a779f0_eth_serdes_channel channel[R8A779F0_ETH_SERDES_NUM];
+};
+
+/*
+ * The datasheet describes initialization procedure without any information
+ * about registers' name/bits. So, this is all black magic to initialize
+ * the hardware.
+ */
+static void r8a779f0_eth_serdes_write32(void __iomem *addr, u32 offs, u32 bank, u32 data)
+{
+ iowrite32(bank, addr + R8A779F0_ETH_SERDES_BANK_SELECT);
+ iowrite32(data, addr + offs);
+}
+
+static int r8a779f0_eth_serdes_reg_wait(void __iomem *addr, u32 offs, u32 bank,
+ u32 mask, u32 expected)
+{
+ u32 val;
+
+ iowrite32(bank, addr + R8A779F0_ETH_SERDES_BANK_SELECT);
+
+ return readl_poll_timeout_atomic(addr + offs, val, (val & mask) == expected,
+ 1, R8A779F0_ETH_SERDES_TIMEOUT_US);
+}
+
+static int
+r8a779f0_eth_serdes_common_init_ram(struct r8a779f0_eth_serdes_channel *channel)
+{
+ int ret;
+
+ ret = r8a779f0_eth_serdes_reg_wait(channel->addr, 0x026c, 0x180, BIT(0), 0x01);
+ if (ret)
+ return ret;
+
+ r8a779f0_eth_serdes_write32(channel->addr0, 0x026c, 0x180, 0x03);
+
+ return ret;
+}
+
+static int
+r8a779f0_eth_serdes_common_setting(struct r8a779f0_eth_serdes_channel *channel)
+{
+ switch (channel->phy_interface) {
+ case PHY_INTERFACE_MODE_SGMII:
+ r8a779f0_eth_serdes_write32(channel->addr0, 0x0244, 0x180, 0x0097);
+ r8a779f0_eth_serdes_write32(channel->addr0, 0x01d0, 0x180, 0x0060);
+ r8a779f0_eth_serdes_write32(channel->addr0, 0x01d8, 0x180, 0x2200);
+ r8a779f0_eth_serdes_write32(channel->addr0, 0x01d4, 0x180, 0x0000);
+ r8a779f0_eth_serdes_write32(channel->addr0, 0x01e0, 0x180, 0x003d);
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int
+r8a779f0_eth_serdes_chan_setting(struct r8a779f0_eth_serdes_channel *channel)
+{
+ int ret;
+
+ switch (channel->phy_interface) {
+ case PHY_INTERFACE_MODE_SGMII:
+ r8a779f0_eth_serdes_write32(channel->addr, 0x0000, 0x380, 0x2000);
+ r8a779f0_eth_serdes_write32(channel->addr, 0x01c0, 0x180, 0x0011);
+ r8a779f0_eth_serdes_write32(channel->addr, 0x0248, 0x180, 0x0540);
+ r8a779f0_eth_serdes_write32(channel->addr, 0x0258, 0x180, 0x0015);
+ r8a779f0_eth_serdes_write32(channel->addr, 0x0144, 0x180, 0x0100);
+ r8a779f0_eth_serdes_write32(channel->addr, 0x01a0, 0x180, 0x0000);
+ r8a779f0_eth_serdes_write32(channel->addr, 0x00d0, 0x180, 0x0002);
+ r8a779f0_eth_serdes_write32(channel->addr, 0x0150, 0x180, 0x0003);
+ r8a779f0_eth_serdes_write32(channel->addr, 0x00c8, 0x180, 0x0100);
+ r8a779f0_eth_serdes_write32(channel->addr, 0x0148, 0x180, 0x0100);
+ r8a779f0_eth_serdes_write32(channel->addr, 0x0174, 0x180, 0x0000);
+ r8a779f0_eth_serdes_write32(channel->addr, 0x0160, 0x180, 0x0007);
+ r8a779f0_eth_serdes_write32(channel->addr, 0x01ac, 0x180, 0x0000);
+ r8a779f0_eth_serdes_write32(channel->addr, 0x00c4, 0x180, 0x0310);
+ r8a779f0_eth_serdes_write32(channel->addr, 0x00c8, 0x380, 0x0101);
+ ret = r8a779f0_eth_serdes_reg_wait(channel->addr, 0x00c8, 0x0180, BIT(0), 0);
+ if (ret)
+ return ret;
+
+ r8a779f0_eth_serdes_write32(channel->addr, 0x0148, 0x180, 0x0101);
+ ret = r8a779f0_eth_serdes_reg_wait(channel->addr, 0x0148, 0x0180, BIT(0), 0);
+ if (ret)
+ return ret;
+
+ r8a779f0_eth_serdes_write32(channel->addr, 0x00c4, 0x180, 0x1310);
+ r8a779f0_eth_serdes_write32(channel->addr, 0x00d8, 0x180, 0x1800);
+ r8a779f0_eth_serdes_write32(channel->addr, 0x00dc, 0x180, 0x0000);
+ r8a779f0_eth_serdes_write32(channel->addr, 0x001c, 0x300, 0x0001);
+ r8a779f0_eth_serdes_write32(channel->addr, 0x0000, 0x380, 0x2100);
+ ret = r8a779f0_eth_serdes_reg_wait(channel->addr, 0x0000, 0x0380, BIT(8), 0);
+ if (ret)
+ return ret;
+
+ if (channel->speed == 1000)
+ r8a779f0_eth_serdes_write32(channel->addr, 0x0000, 0x1f00, 0x0140);
+ else if (channel->speed == 100)
+ r8a779f0_eth_serdes_write32(channel->addr, 0x0000, 0x1f00, 0x2100);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static int r8a779f0_eth_serdes_hw_init(struct r8a779f0_eth_serdes_channel *channel)
+{
+ int ret;
+
+ ret = r8a779f0_eth_serdes_common_init_ram(channel);
+ if (ret)
+ return ret;
+
+ ret = r8a779f0_eth_serdes_reg_wait(channel->addr, 0x0000, 0x300, BIT(15), 0);
+ if (ret)
+ return ret;
+
+ r8a779f0_eth_serdes_write32(channel->addr, 0x03d4, 0x380, 0x0443);
+
+ ret = r8a779f0_eth_serdes_common_setting(channel);
+ if (ret)
+ return ret;
+
+ r8a779f0_eth_serdes_write32(channel->addr, 0x03d0, 0x380, 0x0001);
+
+ r8a779f0_eth_serdes_write32(channel->addr0, 0x0000, 0x380, 0x8000);
+
+ ret = r8a779f0_eth_serdes_common_init_ram(channel);
+ if (ret)
+ return ret;
+
+ ret = r8a779f0_eth_serdes_reg_wait(channel->addr0, 0x0000, 0x380, BIT(15), 0);
+ if (ret)
+ return ret;
+
+ ret = r8a779f0_eth_serdes_chan_setting(channel);
+ if (ret)
+ return ret;
+
+ r8a779f0_eth_serdes_write32(channel->addr, 0x03c0, 0x380, 0x0000);
+ r8a779f0_eth_serdes_write32(channel->addr, 0x03d0, 0x380, 0x0000);
+
+ return 0;
+}
+
+static int r8a779f0_eth_serdes_init(struct phy *p)
+{
+ struct r8a779f0_eth_serdes_channel *channel = phy_get_drvdata(p);
+
+ return r8a779f0_eth_serdes_hw_init(channel);
+}
+
+static int r8a779f0_eth_serdes_set_mode(struct phy *p, enum phy_mode mode,
+ int submode)
+{
+ struct r8a779f0_eth_serdes_channel *channel = phy_get_drvdata(p);
+
+ if (mode != PHY_MODE_ETHERNET)
+ return -EOPNOTSUPP;
+
+ switch (submode) {
+ case PHY_INTERFACE_MODE_GMII:
+ case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_USXGMII:
+ channel->phy_interface = submode;
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int r8a779f0_eth_serdes_set_speed(struct phy *p, int speed)
+{
+ struct r8a779f0_eth_serdes_channel *channel = phy_get_drvdata(p);
+
+ channel->speed = speed;
+
+ return 0;
+}
+
+static const struct phy_ops r8a779f0_eth_serdes_ops = {
+ .init = r8a779f0_eth_serdes_init,
+ .set_mode = r8a779f0_eth_serdes_set_mode,
+ .set_speed = r8a779f0_eth_serdes_set_speed,
+};
+
+static struct phy *r8a779f0_eth_serdes_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct r8a779f0_eth_serdes_drv_data *dd = dev_get_drvdata(dev);
+
+ if (args->args[0] >= R8A779F0_ETH_SERDES_NUM)
+ return ERR_PTR(-ENODEV);
+
+ return dd->channel[args->args[0]].phy;
+}
+
+static const struct of_device_id r8a779f0_eth_serdes_of_table[] = {
+ { .compatible = "renesas,r8a779f0-ether-serdes", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, r8a779f0_eth_serdes_of_table);
+
+static int r8a779f0_eth_serdes_probe(struct platform_device *pdev)
+{
+ struct r8a779f0_eth_serdes_drv_data *dd;
+ struct phy_provider *provider;
+ struct resource *res;
+ int i, ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "invalid resource\n");
+ return -EINVAL;
+ }
+
+ dd = devm_kzalloc(&pdev->dev, sizeof(*dd), GFP_KERNEL);
+ if (!dd)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, dd);
+ dd->pdev = pdev;
+ dd->addr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(dd->addr))
+ return PTR_ERR(dd->addr);
+
+ for (i = 0; i < R8A779F0_ETH_SERDES_NUM; i++) {
+ struct r8a779f0_eth_serdes_channel *channel = &dd->channel[i];
+
+ channel->phy = devm_phy_create(&pdev->dev, NULL,
+ &r8a779f0_eth_serdes_ops);
+ if (IS_ERR(channel->phy))
+ return PTR_ERR(channel->phy);
+ channel->addr = dd->addr + R8A779F0_ETH_SERDES_OFFSET * i;
+ channel->addr0 = dd->addr;
+ phy_set_drvdata(channel->phy, channel);
+ }
+
+ provider = devm_of_phy_provider_register(&pdev->dev,
+ r8a779f0_eth_serdes_xlate);
+ if (IS_ERR(provider))
+ return PTR_ERR(provider);
+
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
+
+ return ret;
+}
+
+static int r8a779f0_eth_serdes_remove(struct platform_device *pdev)
+{
+ pm_runtime_put(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver r8a779f0_eth_serdes_driver_platform = {
+ .probe = r8a779f0_eth_serdes_probe,
+ .remove = r8a779f0_eth_serdes_remove,
+ .driver = {
+ .name = "r8a779f0_eth_serdes",
+ .of_match_table = r8a779f0_eth_serdes_of_table,
+ }
+};
+module_platform_driver(r8a779f0_eth_serdes_driver_platform);
+MODULE_AUTHOR("Yoshihiro Shimoda");
+MODULE_DESCRIPTION("Renesas Ethernet SERDES device driver");
+MODULE_LICENSE("GPL");
--
2.25.1
