Re: [PATCH v2 3/4] media: platform: Add Renesas RZ/G2L MIPI CSI-2 receiver driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Prabhakar,

Thanks for the set.

On Tue, Sep 06, 2022 at 12:04:05AM +0100, Lad Prabhakar wrote:
> Add MIPI CSI-2 receiver driver for Renesas RZ/G2L. The MIPI
> CSI-2 is part of the CRU module found on RZ/G2L family.
> 
> Based on a patch in the BSP by Hien Huynh
> <hien.huynh.px@xxxxxxxxxxx>
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
> v1 -> v2
> * Sorted Kconfig select
> * Prefixed generic names for struct/variables with rzg2_csi2
> * Dropped unnecessary checks for remote source
> * Dropped exporting functions
> * Moved lane validation to probe
> * Split up rzg2l_csi2_dphy_setting() and rzg2l_csi2_mipi_link_setting()
> * Used rzg2l_csi2_write() wherever possible
> * Dropped stream_count/lock
> * Used active subdev state instead of manually storing format in driver
> * Implemented init_cfg/enum_frame_size/enum_mbus_code callbacks
> * Dropped check for bus_type of remote source
> * Switched to manually turn ON/OFF the clocks instead of pm_runtime so that
>   the mipi/dhpy initialization happens as per the HW manual
> * Hardcoded VC0 usage for now as streams API is under development
> 
> RFC v2 -> v1
> * Fixed initialization sequence of DPHY and link
> * Exported DPHY and link initialization functions so that the
>   CRU core driver can initialize the CRU and CSI2 as per the HW manual.
> 
> RFC v1 -> RFC v2
> * new patch (split up as new driver compared to v1)
> ---
>  drivers/media/platform/renesas/Kconfig        |   1 +
>  drivers/media/platform/renesas/Makefile       |   1 +
>  .../media/platform/renesas/rzg2l-cru/Kconfig  |  17 +
>  .../media/platform/renesas/rzg2l-cru/Makefile |   3 +
>  .../platform/renesas/rzg2l-cru/rzg2l-csi2.c   | 761 ++++++++++++++++++
>  .../platform/renesas/rzg2l-cru/rzg2l-csi2.h   |  46 ++
>  6 files changed, 829 insertions(+)
>  create mode 100644 drivers/media/platform/renesas/rzg2l-cru/Kconfig
>  create mode 100644 drivers/media/platform/renesas/rzg2l-cru/Makefile
>  create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c
>  create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.h
> 
> diff --git a/drivers/media/platform/renesas/Kconfig b/drivers/media/platform/renesas/Kconfig
> index 9fd90672ea2d..ed788e991f74 100644
> --- a/drivers/media/platform/renesas/Kconfig
> +++ b/drivers/media/platform/renesas/Kconfig
> @@ -41,6 +41,7 @@ config VIDEO_SH_VOU
>  	  Support for the Video Output Unit (VOU) on SuperH SoCs.
>  
>  source "drivers/media/platform/renesas/rcar-vin/Kconfig"
> +source "drivers/media/platform/renesas/rzg2l-cru/Kconfig"
>  
>  # Mem2mem drivers
>  
> diff --git a/drivers/media/platform/renesas/Makefile b/drivers/media/platform/renesas/Makefile
> index 3ec226ef5fd2..55854e868887 100644
> --- a/drivers/media/platform/renesas/Makefile
> +++ b/drivers/media/platform/renesas/Makefile
> @@ -4,6 +4,7 @@
>  #
>  
>  obj-y += rcar-vin/
> +obj-y += rzg2l-cru/
>  obj-y += vsp1/
>  
>  obj-$(CONFIG_VIDEO_RCAR_DRIF) += rcar_drif.o
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/Kconfig b/drivers/media/platform/renesas/rzg2l-cru/Kconfig
> new file mode 100644
> index 000000000000..57c40bb499df
> --- /dev/null
> +++ b/drivers/media/platform/renesas/rzg2l-cru/Kconfig
> @@ -0,0 +1,17 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +config VIDEO_RZG2L_CSI2
> +	tristate "RZ/G2L MIPI CSI-2 Receiver"
> +	depends on ARCH_RENESAS || COMPILE_TEST
> +	depends on V4L_PLATFORM_DRIVERS
> +	depends on VIDEO_DEV && OF
> +	select MEDIA_CONTROLLER
> +	select RESET_CONTROLLER
> +	select V4L2_FWNODE
> +	select VIDEO_V4L2_SUBDEV_API
> +	help
> +	  Support for Renesas RZ/G2L (and alike SoC's) MIPI CSI-2
> +	  Receiver driver.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called rzg2l-csi2.
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/Makefile b/drivers/media/platform/renesas/rzg2l-cru/Makefile
> new file mode 100644
> index 000000000000..91ea97a944e6
> --- /dev/null
> +++ b/drivers/media/platform/renesas/rzg2l-cru/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +obj-$(CONFIG_VIDEO_RZG2L_CSI2) += rzg2l-csi2.o
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c
> new file mode 100644
> index 000000000000..1f6838ed64fc
> --- /dev/null
> +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c
> @@ -0,0 +1,761 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for Renesas RZ/G2L MIPI CSI-2 Receiver
> + *
> + * Copyright (C) 2022 Renesas Electronics Corp.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_graph.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/reset.h>
> +#include <linux/sys_soc.h>
> +#include <linux/units.h>
> +
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-mc.h>
> +#include <media/v4l2-subdev.h>
> +
> +#include "rzg2l-csi2.h"
> +
> +/* LINK registers */
> +/* Module Configuration Register */
> +#define CSI2nMCG			0x0
> +#define CSI2nMCG_SDLN			GENMASK(11, 8)
> +
> +/* Module Control Register 0 */
> +#define CSI2nMCT0			0x10
> +#define CSI2nMCT0_VDLN(x)		((x) << 0)
> +
> +/* Module Control Register 2 */
> +#define CSI2nMCT2			0x18
> +#define CSI2nMCT2_FRRSKW(x)		((x) << 16)
> +#define CSI2nMCT2_FRRCLK(x)		((x) << 0)
> +
> +/* Module Control Register 3 */
> +#define CSI2nMCT3			0x1c
> +#define CSI2nMCT3_RXEN			BIT(0)
> +
> +/* Reset Control Register */
> +#define CSI2nRTCT			0x28
> +#define CSI2nRTCT_VSRST			BIT(0)
> +
> +/* Reset Status Register */
> +#define CSI2nRTST			0x2c
> +#define CSI2nRTST_VSRSTS		BIT(0)
> +
> +/* Receive Data Type Enable Low Register */
> +#define CSI2nDTEL			0x60
> +
> +/* Receive Data Type Enable High Register */
> +#define CSI2nDTEH			0x64
> +
> +/* Power Management Status Register */
> +#define CSI2nPMST			0x200
> +
> +/* Power Management Status Clear Register */
> +#define CSI2nPMSC			0x204
> +
> +/* DPHY registers */
> +/* D-PHY Control Register 0 */
> +#define CSIDPHYCTRL0			0x400
> +#define CSIDPHYCTRL0_EN_LDO1200		BIT(1)
> +#define CSIDPHYCTRL0_EN_BGR		BIT(0)
> +
> +/* D-PHY Timing Register 0 */
> +#define CSIDPHYTIM0			0x404
> +#define CSIDPHYTIM0_TCLK_MISS(x)	((x) << 24)
> +#define CSIDPHYTIM0_T_INIT(x)		((x) << 0)
> +
> +/* D-PHY Timing Register 1 */
> +#define CSIDPHYTIM1			0x408
> +#define CSIDPHYTIM1_THS_PREPARE(x)	((x) << 24)
> +#define CSIDPHYTIM1_TCLK_PREPARE(x)	((x) << 16)
> +#define CSIDPHYTIM1_THS_SETTLE(x)	((x) << 8)
> +#define CSIDPHYTIM1_TCLK_SETTLE(x)	((x) << 0)
> +
> +/* D-PHY Skew Adjustment Function */
> +#define CSIDPHYSKW0			0x460
> +#define CSIDPHYSKW0_UTIL_DL0_SKW_ADJ(x)	((x) & 0x3)
> +#define CSIDPHYSKW0_UTIL_DL1_SKW_ADJ(x)	(((x) & 0x3) << 4)
> +#define CSIDPHYSKW0_UTIL_DL2_SKW_ADJ(x)	(((x) & 0x3) << 8)
> +#define CSIDPHYSKW0_UTIL_DL3_SKW_ADJ(x)	(((x) & 0x3) << 12)
> +#define CSIDPHYSKW0_DEFAULT_SKW		CSIDPHYSKW0_UTIL_DL0_SKW_ADJ(1) | \
> +					CSIDPHYSKW0_UTIL_DL1_SKW_ADJ(1) | \
> +					CSIDPHYSKW0_UTIL_DL2_SKW_ADJ(1) | \
> +					CSIDPHYSKW0_UTIL_DL3_SKW_ADJ(1)
> +
> +#define VSRSTS_RETRIES			20
> +
> +#define RZG2L_CSI2_DEFAULT_WIDTH	800
> +#define RZG2L_CSI2_DEFAULT_HEIGHT	600
> +#define RZG2L_CSI2_DEFAULT_FMT		MEDIA_BUS_FMT_UYVY8_1X16
> +
> +struct rzg2l_csi2_timings {
> +	u32 t_init;
> +	u32 tclk_miss;
> +	u32 tclk_settle;
> +	u32 ths_settle;
> +	u32 tclk_prepare;
> +	u32 ths_prepare;
> +};
> +
> +enum rzg2l_dphy_timings {
> +	TRANSMISSION_RATE_80_MBPS = 0,
> +	TRANSMISSION_RATE_125_MBPS,
> +	TRANSMISSION_RATE_250_MBPS,
> +	TRANSMISSION_RATE_360_MBPS,
> +	TRANSMISSION_RATE_360_MBPS_PLUS,
> +};
> +
> +static const struct rzg2l_csi2_timings rzg2l_csi2_global_timings[] = {
> +	[TRANSMISSION_RATE_80_MBPS] = {
> +		.t_init = 79801,
> +		.tclk_miss = 4,
> +		.tclk_settle = 23,
> +		.ths_settle = 31,
> +		.tclk_prepare = 10,
> +		.ths_prepare = 19,
> +	},
> +	[TRANSMISSION_RATE_125_MBPS] = {
> +		.t_init = 79801,
> +		.tclk_miss = 4,
> +		.tclk_settle = 23,
> +		.ths_settle = 28,
> +		.tclk_prepare = 10,
> +		.ths_prepare = 19,
> +	},
> +	[TRANSMISSION_RATE_250_MBPS] = {
> +		.t_init = 79801,
> +		.tclk_miss = 4,
> +		.tclk_settle = 23,
> +		.ths_settle = 22,
> +		.tclk_prepare = 10,
> +		.ths_prepare = 16,
> +	},
> +	[TRANSMISSION_RATE_360_MBPS] = {
> +		.t_init = 79801,
> +		.tclk_miss = 4,
> +		.tclk_settle = 18,
> +		.ths_settle = 19,
> +		.tclk_prepare = 10,
> +		.ths_prepare = 10,
> +	},
> +	[TRANSMISSION_RATE_360_MBPS_PLUS] = {
> +		.t_init = 79801,
> +		.tclk_miss = 4,
> +		.tclk_settle = 18,
> +		.ths_settle = 18,
> +		.tclk_prepare = 10,
> +		.ths_prepare = 10,
> +	},
> +};
> +
> +struct rzg2l_csi2_format {
> +	u32 code;
> +	unsigned int datatype;
> +	unsigned int bpp;
> +};
> +
> +static const struct rzg2l_csi2_format rzg2l_csi2_formats[] = {
> +	{ .code = MEDIA_BUS_FMT_UYVY8_1X16,	.datatype = 0x1e, .bpp = 16 },
> +};
> +
> +static const struct rzg2l_csi2_format *rzg2l_csi2_code_to_fmt(unsigned int code)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(rzg2l_csi2_formats); i++)
> +		if (rzg2l_csi2_formats[i].code == code)
> +			return &rzg2l_csi2_formats[i];
> +
> +	return NULL;
> +}
> +
> +static inline struct rzg2l_csi2 *notifier_to_csi2(struct v4l2_async_notifier *n)
> +{
> +	return container_of(n, struct rzg2l_csi2, notifier);
> +}
> +
> +static u32 rzg2l_csi2_read(struct rzg2l_csi2 *csi2, unsigned int reg)
> +{
> +	return ioread32(csi2->base + reg);
> +}
> +
> +static void rzg2l_csi2_write(struct rzg2l_csi2 *csi2, unsigned int reg,
> +			     u32 data)
> +{
> +	iowrite32(data, csi2->base + reg);
> +}
> +
> +static void rzg2l_csi2_set(struct rzg2l_csi2 *csi2, unsigned int reg, u32 set)
> +{
> +	rzg2l_csi2_write(csi2, reg, rzg2l_csi2_read(csi2, reg) | set);
> +}
> +
> +static void rzg2l_csi2_clr(struct rzg2l_csi2 *csi2, unsigned int reg, u32 clr)
> +{
> +	rzg2l_csi2_write(csi2, reg, rzg2l_csi2_read(csi2, reg) & ~clr);
> +}
> +
> +static int rzg2l_csi2_calc_mbps(struct rzg2l_csi2 *csi2)
> +{
> +	struct v4l2_subdev *sd = csi2->remote_source;
> +	const struct rzg2l_csi2_format *format;
> +	const struct v4l2_mbus_framefmt *fmt;
> +	struct v4l2_subdev_state *state;
> +	struct v4l2_ctrl *ctrl;
> +	u64 mbps;
> +
> +	/* Read the pixel rate control from remote. */
> +	ctrl = v4l2_ctrl_find(sd->ctrl_handler, V4L2_CID_PIXEL_RATE);
> +	if (!ctrl) {
> +		dev_err(csi2->dev, "no pixel rate control in subdev %s\n",
> +			sd->name);
> +		return -EINVAL;
> +	}
> +
> +	state = v4l2_subdev_lock_and_get_active_state(&csi2->subdev);
> +	fmt = v4l2_subdev_get_pad_format(sd, state, RZG2L_CSI2_SINK);
> +	v4l2_subdev_unlock_state(state);
> +	format = rzg2l_csi2_code_to_fmt(fmt->code);

You shouldn't access fmt once you've unlocked subdev state.

> +
> +	/*
> +	 * Calculate hsfreq in Mbps
> +	 * hsfreq = (pixel_rate * bits_per_sample) / number_of_lanes
> +	 */
> +	mbps = v4l2_ctrl_g_ctrl_int64(ctrl) * format->bpp;
> +	do_div(mbps, csi2->lanes * 1000000);
> +
> +	return mbps;
> +}
> +
> +int rzg2l_csi2_cmn_rstb_deassert(struct rzg2l_csi2 *csi2)
> +{
> +	return reset_control_deassert(csi2->rstc);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * DPHY setting
> + */
> +
> +static int rzg2l_csi2_dphy_disable(struct rzg2l_csi2 *csi2)
> +{
> +	int ret;
> +
> +	/* Reset the CRU (D-PHY) */
> +	ret = reset_control_assert(csi2->rstc);
> +	if (ret)
> +		return ret;
> +
> +	/* Stop the D-PHY clock */
> +	clk_disable_unprepare(csi2->sysclk);
> +
> +	/* Cancel the EN_LDO1200 register setting */
> +	rzg2l_csi2_clr(csi2, CSIDPHYCTRL0, CSIDPHYCTRL0_EN_LDO1200);
> +
> +	/* Cancel the EN_BGR register setting */
> +	rzg2l_csi2_clr(csi2, CSIDPHYCTRL0, CSIDPHYCTRL0_EN_BGR);
> +
> +	return 0;
> +}
> +
> +static int rzg2l_csi2_dphy_enable(struct rzg2l_csi2 *csi2)
> +{
> +	const struct rzg2l_csi2_timings *dphy_timing;
> +	u32 dphytim0, dphytim1;
> +	int mbps;
> +	int ret;
> +
> +	mbps = rzg2l_csi2_calc_mbps(csi2);
> +	if (mbps < 0)
> +		return mbps;
> +
> +	csi2->hsfreq = mbps;
> +
> +	/* Set DPHY timing parameters */
> +	if (csi2->hsfreq <= 80)
> +		dphy_timing = &rzg2l_csi2_global_timings[TRANSMISSION_RATE_80_MBPS];
> +	else if (csi2->hsfreq <= 125)
> +		dphy_timing = &rzg2l_csi2_global_timings[TRANSMISSION_RATE_125_MBPS];
> +	else if (csi2->hsfreq <= 250)
> +		dphy_timing = &rzg2l_csi2_global_timings[TRANSMISSION_RATE_250_MBPS];
> +	else if (csi2->hsfreq <= 360)
> +		dphy_timing = &rzg2l_csi2_global_timings[TRANSMISSION_RATE_360_MBPS];
> +	else if (csi2->hsfreq <= 1500)
> +		dphy_timing = &rzg2l_csi2_global_timings[TRANSMISSION_RATE_360_MBPS_PLUS];
> +	else
> +		return -EINVAL;
> +
> +	/* Set D-PHY timing parameters */
> +	dphytim0 = CSIDPHYTIM0_TCLK_MISS(dphy_timing->tclk_miss) |
> +			CSIDPHYTIM0_T_INIT(dphy_timing->t_init);
> +	dphytim1 = CSIDPHYTIM1_THS_PREPARE(dphy_timing->ths_prepare) |
> +			CSIDPHYTIM1_TCLK_PREPARE(dphy_timing->tclk_prepare) |
> +			CSIDPHYTIM1_THS_SETTLE(dphy_timing->ths_settle) |
> +			CSIDPHYTIM1_TCLK_SETTLE(dphy_timing->tclk_settle);
> +	rzg2l_csi2_write(csi2, CSIDPHYTIM0, dphytim0);
> +	rzg2l_csi2_write(csi2, CSIDPHYTIM1, dphytim1);
> +
> +	/* Enable D-PHY power control 0 */
> +	rzg2l_csi2_write(csi2, CSIDPHYSKW0, CSIDPHYSKW0_DEFAULT_SKW);
> +
> +	/* Set the EN_BGR bit */
> +	rzg2l_csi2_set(csi2, CSIDPHYCTRL0, CSIDPHYCTRL0_EN_BGR);
> +
> +	/* Delay 20us to be stable */
> +	usleep_range(20, 40);
> +
> +	/* Enable D-PHY power control 1 */
> +	rzg2l_csi2_set(csi2, CSIDPHYCTRL0, CSIDPHYCTRL0_EN_LDO1200);
> +
> +	/* Delay 10us to be stable */
> +	usleep_range(10, 20);
> +
> +	/* Start supplying the internal clock for the D-PHY block */
> +	ret = clk_prepare_enable(csi2->sysclk);
> +	if (ret)
> +		rzg2l_csi2_dphy_disable(csi2);
> +
> +	return ret;
> +}
> +
> +int rzg2l_csi2_dphy_setting(struct rzg2l_csi2 *csi2, bool on)
> +{
> +	if (on)
> +		return rzg2l_csi2_dphy_enable(csi2);
> +
> +	return rzg2l_csi2_dphy_disable(csi2);
> +}
> +
> +static void rzg2l_csi2_mipi_link_enable(struct rzg2l_csi2 *csi2)
> +{
> +	unsigned long vclk_rate = clk_get_rate(csi2->vclk) / HZ_PER_MHZ;
> +	u32 frrskw, frrclk, frrskw_coeff, frrclk_coeff;
> +
> +	/* Select data lanes */
> +	rzg2l_csi2_write(csi2, CSI2nMCT0, CSI2nMCT0_VDLN(csi2->lanes));
> +
> +	frrskw_coeff = 3 * vclk_rate * 8;
> +	frrclk_coeff = frrskw_coeff / 2;
> +	frrskw = DIV_ROUND_UP(frrskw_coeff, csi2->hsfreq);
> +	frrclk = DIV_ROUND_UP(frrclk_coeff, csi2->hsfreq);
> +	rzg2l_csi2_write(csi2, CSI2nMCT2, CSI2nMCT2_FRRSKW(frrskw) |
> +			 CSI2nMCT2_FRRCLK(frrclk));
> +
> +	/*
> +	 * Select data type.
> +	 * FS, FE, LS, LE, Generic Short Packet Codes 1 to 8,
> +	 * Generic Long Packet Data Types 1 to 4 YUV422 8-bit,
> +	 * RGB565, RGB888, RAW8 to RAW20, User-defined 8-bit
> +	 * data types 1 to 8
> +	 */
> +	rzg2l_csi2_write(csi2, CSI2nDTEL, 0xf778ff0f);
> +	rzg2l_csi2_write(csi2, CSI2nDTEH, 0x00ffff1f);
> +
> +	/* Enable LINK reception */
> +	rzg2l_csi2_write(csi2, CSI2nMCT3, CSI2nMCT3_RXEN);
> +}
> +
> +static void rzg2l_csi2_mipi_link_disable(struct rzg2l_csi2 *csi2)
> +{
> +	unsigned int timeout = VSRSTS_RETRIES;
> +
> +	/* Stop LINK reception */
> +	rzg2l_csi2_clr(csi2, CSI2nMCT3, CSI2nMCT3_RXEN);
> +
> +	/* Request a software reset of the LINK Video Pixel Interface */
> +	rzg2l_csi2_write(csi2, CSI2nRTCT, CSI2nRTCT_VSRST);
> +
> +	/* Make sure CSI2nRTST.VSRSTS bit is cleared */
> +	while (timeout--) {
> +		if (!(rzg2l_csi2_read(csi2, CSI2nRTST) & CSI2nRTST_VSRSTS))
> +			break;
> +		usleep_range(100, 200);
> +	};
> +
> +	if (!timeout)
> +		dev_err(csi2->dev, "Clearing CSI2nRTST.VSRSTS timed out\n");
> +}
> +
> +void rzg2l_csi2_mipi_link_setting(struct rzg2l_csi2 *csi2, bool on)
> +{
> +	if (on)
> +		rzg2l_csi2_mipi_link_enable(csi2);
> +	else
> +		rzg2l_csi2_mipi_link_disable(csi2);
> +}
> +
> +static int rzg2l_csi2_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> +	struct rzg2l_csi2 *csi2 = sd_to_csi2(sd);
> +
> +	return v4l2_subdev_call(csi2->remote_source, video, s_stream, enable);
> +}
> +
> +static int rzg2l_csi2_set_format(struct v4l2_subdev *sd,
> +				 struct v4l2_subdev_state *state,
> +				 struct v4l2_subdev_format *fmt)
> +{
> +	struct v4l2_mbus_framefmt *src_format;
> +	struct v4l2_mbus_framefmt *format;
> +
> +	if (fmt->pad > RZG2L_CSI2_SINK)
> +		return -EINVAL;
> +
> +	format = v4l2_subdev_get_pad_format(sd, state, fmt->pad);
> +
> +	if (!rzg2l_csi2_code_to_fmt(fmt->format.code))
> +		format->code = rzg2l_csi2_formats[0].code;
> +	else
> +		format->code = fmt->format.code;
> +
> +	format->field = V4L2_FIELD_NONE;
> +	format->colorspace = V4L2_COLORSPACE_SRGB;
> +	format->width = fmt->format.width;
> +	format->height = fmt->format.height;
> +	fmt->format = *format;
> +
> +	/* propagate format to source pad */
> +	src_format = v4l2_subdev_get_pad_format(sd, state, RZG2L_CSI2_SOURCE_VC0);
> +	*src_format = *format;
> +
> +	return 0;
> +}
> +
> +static int rzg2l_csi2_init_config(struct v4l2_subdev *sd,
> +				  struct v4l2_subdev_state *sd_state)
> +{
> +	struct v4l2_subdev_format fmt = { 0 };

You could do this in variable initialisation.

> +
> +	fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
> +	fmt.format.width = RZG2L_CSI2_DEFAULT_WIDTH;
> +	fmt.format.height = RZG2L_CSI2_DEFAULT_HEIGHT;
> +	fmt.format.field = V4L2_FIELD_NONE;
> +	fmt.format.code = RZG2L_CSI2_DEFAULT_FMT;
> +	fmt.format.colorspace = V4L2_COLORSPACE_SRGB;
> +
> +	return rzg2l_csi2_set_format(sd, sd_state, &fmt);
> +}
> +
> +static int rzg2l_csi2_enum_mbus_code(struct v4l2_subdev *sd,
> +				     struct v4l2_subdev_state *sd_state,
> +				     struct v4l2_subdev_mbus_code_enum *code)
> +{
> +	if (code->index >= ARRAY_SIZE(rzg2l_csi2_formats))
> +		return -EINVAL;
> +
> +	code->code = rzg2l_csi2_formats[code->index].code;
> +
> +	return 0;
> +}
> +
> +static int rzg2l_csi2_enum_frame_size(struct v4l2_subdev *sd,
> +				      struct v4l2_subdev_state *sd_state,
> +				      struct v4l2_subdev_frame_size_enum *fse)
> +{
> +	if (fse->index != 0)
> +		return -EINVAL;
> +
> +	fse->min_width = clamp_t(u32, 1, 320, 2800);
> +	fse->min_height = clamp_t(u32, 1, 240, 4095);
> +	fse->max_width = clamp_t(u32, -1, 320, 2800);
> +	fse->max_height = clamp_t(u32, -1, 240, 4095);
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_subdev_video_ops rzg2l_csi2_video_ops = {
> +	.s_stream = rzg2l_csi2_s_stream,
> +};
> +
> +static const struct v4l2_subdev_pad_ops rzg2l_csi2_pad_ops = {
> +	.enum_mbus_code = rzg2l_csi2_enum_mbus_code,
> +	.init_cfg = rzg2l_csi2_init_config,
> +	.enum_frame_size = rzg2l_csi2_enum_frame_size,
> +	.set_fmt = rzg2l_csi2_set_format,
> +	.get_fmt = v4l2_subdev_get_fmt,
> +};
> +
> +static const struct v4l2_subdev_ops rzg2l_csi2_subdev_ops = {
> +	.video	= &rzg2l_csi2_video_ops,
> +	.pad	= &rzg2l_csi2_pad_ops,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Async handling and registration of subdevices and links.
> + */
> +
> +static int rzg2l_csi2_notify_bound(struct v4l2_async_notifier *notifier,
> +				   struct v4l2_subdev *subdev,
> +				   struct v4l2_async_subdev *asd)
> +{
> +	struct rzg2l_csi2 *csi2 = notifier_to_csi2(notifier);
> +
> +	csi2->remote_source = subdev;
> +
> +	dev_dbg(csi2->dev, "Bound subdev: %s pad\n", subdev->name);
> +
> +	return media_create_pad_link(&subdev->entity, RZG2L_CSI2_SINK,
> +				     &csi2->subdev.entity, 0,
> +				     MEDIA_LNK_FL_ENABLED |
> +				     MEDIA_LNK_FL_IMMUTABLE);
> +}
> +
> +static void rzg2l_csi2_notify_unbind(struct v4l2_async_notifier *notifier,
> +				     struct v4l2_subdev *subdev,
> +				     struct v4l2_async_subdev *asd)
> +{
> +	struct rzg2l_csi2 *csi2 = notifier_to_csi2(notifier);
> +
> +	csi2->remote_source = NULL;
> +
> +	dev_dbg(csi2->dev, "Unbind subdev %s\n", subdev->name);
> +}
> +
> +static const struct v4l2_async_notifier_operations rzg2l_csi2_notify_ops = {
> +	.bound = rzg2l_csi2_notify_bound,
> +	.unbind = rzg2l_csi2_notify_unbind,
> +};
> +
> +static int rzg2l_csi2_parse_v4l2(struct rzg2l_csi2 *csi2,
> +				 struct v4l2_fwnode_endpoint *vep)
> +{
> +	/* Only port 0 endpoint 0 is valid. */
> +	if (vep->base.port || vep->base.id)
> +		return -ENOTCONN;
> +
> +	csi2->lanes = vep->bus.mipi_csi2.num_data_lanes;
> +
> +	return 0;
> +}
> +
> +static int rzg2l_csi2_parse_dt(struct rzg2l_csi2 *csi2)
> +{
> +	struct v4l2_fwnode_endpoint v4l2_ep = {
> +		.bus_type = V4L2_MBUS_CSI2_DPHY
> +	};
> +	struct v4l2_async_subdev *asd;
> +	struct fwnode_handle *fwnode;
> +	struct fwnode_handle *ep;
> +	int ret;
> +
> +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(csi2->dev), 0, 0, 0);
> +	if (!ep) {
> +		dev_err(csi2->dev, "Not connected to subdevice\n");
> +		return -EINVAL;
> +	}
> +
> +	ret = v4l2_fwnode_endpoint_parse(ep, &v4l2_ep);
> +	if (ret) {
> +		dev_err(csi2->dev, "Could not parse v4l2 endpoint\n");
> +		fwnode_handle_put(ep);
> +		return -EINVAL;
> +	}
> +
> +	ret = rzg2l_csi2_parse_v4l2(csi2, &v4l2_ep);
> +	if (ret) {
> +		fwnode_handle_put(ep);
> +		return ret;
> +	}
> +
> +	fwnode = fwnode_graph_get_remote_endpoint(ep);
> +	fwnode_handle_put(ep);
> +
> +	dev_dbg(csi2->dev, "Found '%pOF'\n", to_of_node(fwnode));

You can enable debug message printing in v4l2 fwnode, and sysfs now has
some, too. I'd suggest dropping this line .

> +
> +	v4l2_async_nf_init(&csi2->notifier);
> +	csi2->notifier.ops = &rzg2l_csi2_notify_ops;
> +
> +	asd = v4l2_async_nf_add_fwnode(&csi2->notifier, fwnode,
> +				       struct v4l2_async_subdev);
> +	fwnode_handle_put(fwnode);
> +	if (IS_ERR(asd))
> +		return PTR_ERR(asd);
> +
> +	ret = v4l2_async_subdev_nf_register(&csi2->subdev, &csi2->notifier);
> +	if (ret)
> +		v4l2_async_nf_cleanup(&csi2->notifier);
> +
> +	return ret;
> +}
> +
> +static int rzg2l_validate_csi2_lanes(struct rzg2l_csi2 *csi2)
> +{
> +	int ret = 0;
> +	int lanes;
> +
> +	if (csi2->lanes != 1 && csi2->lanes != 2 && csi2->lanes != 4) {
> +		dev_err(csi2->dev, "Unsupported number of data-lanes: %u\n",
> +			csi2->lanes);
> +		return -EINVAL;
> +	}
> +
> +	ret = clk_prepare_enable(csi2->pclk);
> +	if (ret)
> +		return ret;
> +
> +	/* Checking the maximum lanes support for CSI-2 module */
> +	lanes = (rzg2l_csi2_read(csi2, CSI2nMCG) & CSI2nMCG_SDLN) >> 8;
> +	if (lanes < csi2->lanes) {
> +		dev_err(csi2->dev,
> +			"Failed to support %d data lanes\n", csi2->lanes);
> +		ret = -EINVAL;
> +	}
> +
> +	clk_disable_unprepare(csi2->pclk);
> +
> +	return ret;
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Platform Device Driver.
> + */
> +
> +static const struct media_entity_operations rzg2l_csi2_entity_ops = {
> +	.link_validate = v4l2_subdev_link_validate,
> +};
> +
> +static int rzg2l_csi2_probe(struct platform_device *pdev)
> +{
> +	struct rzg2l_csi2 *csi2;
> +	int ret;
> +
> +	csi2 = devm_kzalloc(&pdev->dev, sizeof(*csi2), GFP_KERNEL);
> +	if (!csi2)
> +		return -ENOMEM;
> +
> +	csi2->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(csi2->base))
> +		return PTR_ERR(csi2->base);
> +
> +	csi2->rstc = devm_reset_control_get(&pdev->dev, "cmn-rstb");
> +	if (IS_ERR(csi2->rstc))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(csi2->rstc),
> +				     "failed to get cpg cmn-rstb\n");
> +
> +	csi2->sysclk = devm_clk_get(&pdev->dev, "sysclk");
> +	if (IS_ERR(csi2->sysclk)) {
> +		dev_err(&pdev->dev, "Failed to get sysclk");
> +		return PTR_ERR(csi2->sysclk);
> +	}
> +
> +	csi2->vclk = devm_clk_get(&pdev->dev, "vclk");
> +	if (IS_ERR(csi2->vclk)) {
> +		dev_err(&pdev->dev, "Failed to get vclk");
> +		return PTR_ERR(csi2->vclk);
> +	}
> +
> +	csi2->pclk = devm_clk_get(&pdev->dev, "pclk");
> +	if (IS_ERR(csi2->pclk)) {
> +		dev_err(&pdev->dev, "Failed to get pclk");
> +		return PTR_ERR(csi2->pclk);
> +	}
> +
> +	csi2->dev = &pdev->dev;
> +
> +	platform_set_drvdata(pdev, csi2);
> +
> +	ret = rzg2l_csi2_parse_dt(csi2);
> +	if (ret)
> +		return ret;
> +
> +	ret = rzg2l_validate_csi2_lanes(csi2);
> +	if (ret)
> +		return ret;
> +
> +	csi2->subdev.dev = &pdev->dev;
> +	v4l2_subdev_init(&csi2->subdev, &rzg2l_csi2_subdev_ops);
> +	v4l2_set_subdevdata(&csi2->subdev, &pdev->dev);
> +	snprintf(csi2->subdev.name, sizeof(csi2->subdev.name),
> +		 "csi-%s", dev_name(&pdev->dev));
> +	csi2->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
> +
> +	csi2->subdev.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
> +	csi2->subdev.entity.ops = &rzg2l_csi2_entity_ops;
> +
> +	csi2->pads[RZG2L_CSI2_SINK].flags = MEDIA_PAD_FL_SINK;
> +	/*
> +	 * TODO: RZ/G2L CSI2 supports 4 virtual channels, as virtual
> +	 * channels should be implemented by streams API which is under
> +	 * development lets hardcode to VC0 for now.
> +	 */
> +	csi2->pads[RZG2L_CSI2_SOURCE_VC0].flags = MEDIA_PAD_FL_SOURCE;
> +	ret = media_entity_pads_init(&csi2->subdev.entity, 2, csi2->pads);
> +	if (ret)
> +		goto error_async;
> +
> +	pm_runtime_enable(&pdev->dev);
> +
> +	ret = v4l2_subdev_init_finalize(&csi2->subdev);
> +	if (ret < 0)
> +		goto error_pm;
> +
> +	/* enable pclk for register access */
> +	ret = clk_prepare_enable(csi2->pclk);
> +	if (ret)
> +		goto error_pm;
> +
> +	ret = v4l2_async_register_subdev(&csi2->subdev);
> +	if (ret < 0)
> +		goto error_subdev;
> +
> +	dev_info(csi2->dev, "%d lanes found\n", csi2->lanes);

This is also printed if you enable debug level prints in v4l2 fwnode.

> +
> +	return 0;
> +
> +error_subdev:
> +	clk_disable_unprepare(csi2->pclk);
> +	v4l2_subdev_cleanup(&csi2->subdev);
> +error_pm:
> +	pm_runtime_disable(&pdev->dev);
> +error_async:
> +	v4l2_async_nf_unregister(&csi2->notifier);
> +	v4l2_async_nf_cleanup(&csi2->notifier);
> +
> +	return ret;
> +}
> +
> +static const struct of_device_id rzg2l_csi2_of_table[] = {
> +	{ .compatible = "renesas,rzg2l-csi2", },
> +	{ /* sentinel */ }
> +};
> +
> +static int rzg2l_csi2_remove(struct platform_device *pdev)
> +{
> +	struct rzg2l_csi2 *csi2 = platform_get_drvdata(pdev);
> +
> +	v4l2_async_nf_unregister(&csi2->notifier);
> +	v4l2_async_nf_cleanup(&csi2->notifier);
> +	v4l2_async_unregister_subdev(&csi2->subdev);
> +	clk_disable_unprepare(csi2->pclk);
> +	v4l2_subdev_cleanup(&csi2->subdev);
> +
> +	pm_runtime_disable(&pdev->dev);
> +
> +	return 0;
> +}
> +
> +static struct platform_driver rzg2l_csi2_pdrv = {
> +	.remove	= rzg2l_csi2_remove,
> +	.probe	= rzg2l_csi2_probe,
> +	.driver	= {
> +		.name = "rzg2l-csi2",
> +		.of_match_table = rzg2l_csi2_of_table,
> +	},
> +};
> +
> +module_platform_driver(rzg2l_csi2_pdrv);
> +
> +MODULE_AUTHOR("Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Renesas RZ/G2L MIPI CSI2 receiver driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.h b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.h
> new file mode 100644
> index 000000000000..f85a1d44250f
> --- /dev/null
> +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.h
> @@ -0,0 +1,46 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright (C) 2022 Renesas Electronics Corp.
> + */
> +
> +#ifndef __RZG2L_CSI2__
> +#define __RZG2L_CSI2__
> +
> +enum rzg2l_csi2_pads {
> +	RZG2L_CSI2_SINK = 0,
> +	RZG2L_CSI2_SOURCE_VC0,
> +	RZG2L_CSI2_SOURCE_VC1,
> +	RZG2L_CSI2_SOURCE_VC2,
> +	RZG2L_CSI2_SOURCE_VC3,
> +	NR_OF_RZG2L_CSI2_PAD,
> +};
> +
> +struct rzg2l_csi2 {
> +	struct device *dev;
> +	void __iomem *base;
> +	struct reset_control *rstc;
> +	struct clk *sysclk;
> +	struct clk *vclk;
> +	struct clk *pclk;
> +
> +	struct v4l2_subdev subdev;
> +	struct media_pad pads[NR_OF_RZG2L_CSI2_PAD];
> +
> +	struct v4l2_async_notifier notifier;
> +	struct v4l2_subdev *remote_source;
> +
> +	unsigned short lanes;
> +
> +	unsigned long hsfreq;
> +};
> +
> +static inline struct rzg2l_csi2 *sd_to_csi2(struct v4l2_subdev *sd)
> +{
> +	return container_of(sd, struct rzg2l_csi2, subdev);
> +}
> +
> +int rzg2l_csi2_cmn_rstb_deassert(struct rzg2l_csi2 *csi2);
> +int rzg2l_csi2_dphy_setting(struct rzg2l_csi2 *csi2, bool on);
> +void rzg2l_csi2_mipi_link_setting(struct rzg2l_csi2 *csi2, bool on);

Are these something that could be achieved using the standard interfaces,
as I believe the other drivers are doing? The pre_streamon and
post_streamon callbacks could be relevant for this.

> +
> +#endif

-- 
Kind regards,

Sakari Ailus



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux