RE: [PATCH v4 07/10] riscv: dts: r9a07g043: Add placeholder nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Just ignore my mail, As I realised IRQ property in each node will be a problem.

Cheers,
Biju

> -----Original Message-----
> From: Biju Das
> Sent: 20 September 2022 20:22
> To: Prabhakar <prabhakar.csengg@xxxxxxxxx>; Rob Herring
> <robh+dt@xxxxxxxxxx>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@xxxxxxxxxx>; Paul Walmsley
> <paul.walmsley@xxxxxxxxxx>; Palmer Dabbelt <palmer@xxxxxxxxxxx>;
> Albert Ou <aou@xxxxxxxxxxxxxxxxx>; Geert Uytterhoeven
> <geert+renesas@xxxxxxxxx>; Magnus Damm <magnus.damm@xxxxxxxxx>; Conor
> Dooley <conor.dooley@xxxxxxxxxxxxx>
> Cc: Heiko Stuebner <heiko@xxxxxxxxx>; Heinrich Schuchardt
> <heinrich.schuchardt@xxxxxxxxxxxxx>; Atish Patra
> <atishp@xxxxxxxxxxxx>; devicetree@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; linux-riscv@xxxxxxxxxxxxxxxxxxx; linux-
> renesas-soc@xxxxxxxxxxxxxxx; Prabhakar Mahadev Lad <prabhakar.mahadev-
> lad.rj@xxxxxxxxxxxxxx>
> Subject: RE: [PATCH v4 07/10] riscv: dts: r9a07g043: Add placeholder
> nodes
> 
> Hi Prabhakar,
> 
> Thanks for the patch.
> 
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> >
> > Add empty placeholder nodes to RZ/Five (R9A07G043) SoC DTSI.
> >
> > This is in preparation to reuse the RZ/G2UL SMARC SoM and carrier
> > board DTSIs([0] and [1]).
> 
> Just a question,
> 
> Why can't we reuse SoC dtsi as well, as 90% of the SoC nodes are same?
> 
> Split common stuff from arch/arm/boot/dts/renesas/r9a07g043.dtsi
> 
> and add ARM specific CPU, IRQ to
> arch/arm/boot/dts/renesas/r9a07g043u.dtsi
> 
> RISC-V specific CPU, IRQ to
> arch/riscv/boot/dts/renesas/r9a07g043f.dtsi
> 
> Both r9a07g043{u,f} dtsi will add common dtsi.
> 
> 
> Cheers,
> Biju
> 
> 
> >
> > As the RZ/G2UL SMARC EVK enables almost all the blocks supported by
> > the SoC and whereas for the RZ/Five SMARC EVK we will gradually be
> > enabling the blocks as a result we are adding the placeholder nodes
> to
> > avoid DTB compilation errors (currently we dont have support in DTC
> to
> > delete the reference nodes without actual nodes).
> >
> > [0] arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
> > [1] arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-
> lad.rj@xxxxxxxxxxxxxx>
> > ---
> > v3 -> v4
> > * Dropped status and reg-names properties
> > * Updated the commit message
> > * Note sbc node is not enabled in RZ/G2UL SMARC EVK but will be soon
> >   enabled so added a placeholder for this too.
> >
> > v2 -> v3
> > * New patch
> > ---
> >  arch/riscv/boot/dts/renesas/r9a07g043.dtsi | 150
> > +++++++++++++++++++++
> >  1 file changed, 150 insertions(+)
> >
> > diff --git a/arch/riscv/boot/dts/renesas/r9a07g043.dtsi
> > b/arch/riscv/boot/dts/renesas/r9a07g043.dtsi
> > index fb6733f3cc2b..d90d263b1b13 100644
> > --- a/arch/riscv/boot/dts/renesas/r9a07g043.dtsi
> > +++ b/arch/riscv/boot/dts/renesas/r9a07g043.dtsi
> > @@ -13,6 +13,14 @@ / {
> >  	#address-cells = <2>;
> >  	#size-cells = <2>;
> >
> > +	audio_clk1: audio1-clk {
> > +		/* placeholder */
> > +	};
> > +
> > +	audio_clk2: audio2-clk {
> > +		/* placeholder */
> > +	};
> > +
> >  	cpus {
> >  		#address-cells = <1>;
> >  		#size-cells = <0>;
> > @@ -54,6 +62,19 @@ soc: soc {
> >  		#size-cells = <2>;
> >  		ranges;
> >
> > +		ssi1: ssi@1004a000 {
> > +			reg = <0 0x1004a000 0 0x400>;
> > +			#sound-dai-cells = <0>;
> > +
> > +			/* placeholder */
> > +		};
> > +
> > +		spi1: spi@1004b000 {
> > +			reg = <0 0x1004b000 0 0x400>;
> > +
> > +			/* placeholder */
> > +		};
> > +
> >  		scif0: serial@1004b800 {
> >  			compatible = "renesas,scif-r9a07g043",
> >  				     "renesas,scif-r9a07g044";
> > @@ -73,6 +94,41 @@ scif0: serial@1004b800 {
> >  			status = "disabled";
> >  		};
> >
> > +		canfd: can@10050000 {
> > +			reg = <0 0x10050000 0 0x8000>;
> > +
> > +			/* placeholder */
> > +		};
> > +
> > +		i2c0: i2c@10058000 {
> > +			reg = <0 0x10058000 0 0x400>;
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			/* placeholder */
> > +		};
> > +
> > +		i2c1: i2c@10058400 {
> > +			reg = <0 0x10058400 0 0x400>;
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +
> > +			/* placeholder */
> > +		};
> > +
> > +		adc: adc@10059000 {
> > +			reg = <0 0x10059000 0 0x400>;
> > +
> > +			/* placeholder */
> > +		};
> > +
> > +		sbc: spi@10060000 {
> > +			reg = <0 0x10060000 0 0x10000>,
> > +			      <0 0x20000000 0 0x10000000>,
> > +			      <0 0x10070000 0 0x10000>;
> > +
> > +			/* placeholder */
> > +		};
> > +
> >  		cpg: clock-controller@11010000 {
> >  			compatible = "renesas,r9a07g043-cpg";
> >  			reg = <0 0x11010000 0 0x10000>;
> > @@ -104,6 +160,82 @@ pinctrl: pinctrl@11030000 {
> >  				 <&cpg R9A07G043_GPIO_SPARE_RESETN>;
> >  		};
> >
> > +		sdhi0: mmc@11c00000 {
> > +			reg = <0x0 0x11c00000 0 0x10000>;
> > +
> > +			/* placeholder */
> > +		};
> > +
> > +		sdhi1: mmc@11c10000 {
> > +			reg = <0x0 0x11c10000 0 0x10000>;
> > +
> > +			/* placeholder */
> > +		};
> > +
> > +		eth0: ethernet@11c20000 {
> > +			reg = <0 0x11c20000 0 0x10000>;
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +
> > +			/* placeholder */
> > +		};
> > +
> > +		eth1: ethernet@11c30000 {
> > +			reg = <0 0x11c30000 0 0x10000>;
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +
> > +			/* placeholder */
> > +		};
> > +
> > +		phyrst: usbphy-ctrl@11c40000 {
> > +			reg = <0 0x11c40000 0 0x10000>;
> > +
> > +			/* placeholder */
> > +		};
> > +
> > +		ohci0: usb@11c50000 {
> > +			reg = <0 0x11c50000 0 0x100>;
> > +
> > +			/* placeholder */
> > +		};
> > +
> > +		ohci1: usb@11c70000 {
> > +			reg = <0 0x11c70000 0 0x100>;
> > +
> > +			/* placeholder */
> > +		};
> > +
> > +		ehci0: usb@11c50100 {
> > +			reg = <0 0x11c50100 0 0x100>;
> > +
> > +			/* placeholder */
> > +		};
> > +
> > +		ehci1: usb@11c70100 {
> > +			reg = <0 0x11c70100 0 0x100>;
> > +
> > +			/* placeholder */
> > +		};
> > +
> > +		usb2_phy0: usb-phy@11c50200 {
> > +			reg = <0 0x11c50200 0 0x700>;
> > +
> > +			/* placeholder */
> > +		};
> > +
> > +		usb2_phy1: usb-phy@11c70200 {
> > +			reg = <0 0x11c70200 0 0x700>;
> > +
> > +			/* placeholder */
> > +		};
> > +
> > +		hsusb: usb@11c60000 {
> > +			reg = <0 0x11c60000 0 0x10000>;
> > +
> > +			/* placeholder */
> > +		};
> > +
> >  		plic: interrupt-controller@12c00000 {
> >  			compatible = "renesas,r9a07g043-plic",
> "andestech,nceplic100";
> >  			#interrupt-cells = <2>;
> > @@ -116,5 +248,23 @@ plic: interrupt-controller@12c00000 {
> >  			resets = <&cpg R9A07G043_NCEPLIC_ARESETN>;
> >  			interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9>;
> >  		};
> > +
> > +		wdt0: watchdog@12800800 {
> > +			reg = <0 0x12800800 0 0x400>;
> > +
> > +			/* placeholder */
> > +		};
> > +
> > +		ostm1: timer@12801400 {
> > +			reg = <0x0 0x12801400 0x0 0x400>;
> > +
> > +			/* placeholder */
> > +		};
> > +
> > +		ostm2: timer@12801800 {
> > +			reg = <0x0 0x12801800 0x0 0x400>;
> > +
> > +			/* placeholder */
> > +		};
> >  	};
> >  };
> > --
> > 2.25.1





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux