Re: [PATCH net] net: phy: Warn about incorrect mdio_bus_phy_resume() state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 16, 2022 at 3:20 PM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
> On Fri, Aug 12, 2022 at 6:39 PM Florian Fainelli <f.fainelli@xxxxxxxxx> wrote:
> > On 8/12/22 04:19, Marek Szyprowski wrote:
> > > On 02.08.2022 01:34, Florian Fainelli wrote:
> > >> Calling mdio_bus_phy_resume() with neither the PHY state machine set to
> > >> PHY_HALTED nor phydev->mac_managed_pm set to true is a good indication
> > >> that we can produce a race condition looking like this:
> > >>
> > >> CPU0                                         CPU1
> > >> bcmgenet_resume
> > >>    -> phy_resume
> > >>      -> phy_init_hw
> > >>    -> phy_start
> > >>      -> phy_resume
> > >>                                                   phy_start_aneg()
> > >> mdio_bus_phy_resume
> > >>    -> phy_resume
> > >>       -> phy_write(..., BMCR_RESET)
> > >>        -> usleep()                                  -> phy_read()
> > >>
> > >> with the phy_resume() function triggering a PHY behavior that might have
> > >> to be worked around with (see bf8bfc4336f7 ("net: phy: broadcom: Fix
> > >> brcm_fet_config_init()") for instance) that ultimately leads to an error
> > >> reading from the PHY.
> > >>
> > >> Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
> > >> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
> > >
> > > This patch, as probably intended, triggers a warning during system
> > > suspend/resume cycle in the SMSC911x driver. I've observed it on ARM
> > > Juno R1 board on the kernel compiled from next-202208010:
> > >
> > >    ------------[ cut here ]------------
> > >    WARNING: CPU: 1 PID: 398 at drivers/net/phy/phy_device.c:323
> > > mdio_bus_phy_resume+0x34/0xc8
>
> I am seeing the same on the ape6evm and kzm9g development
> boards with smsc911x Ethernet, and on various boards with Renesas

So the smsc911x issue was fixed by commit 3ce9f2bef7552893
("net: smsc911x: Stop and start PHY during suspend and resume").

> Ethernet (sh_eth or ravb) if Wake-on-LAN is disabled.

The issue is still seen with sh_eth and ravb.  I have sent to fixes:
https://lore.kernel.org/r/c6e1331b9bef61225fa4c09db3ba3e2e7214ba2d.1663598886.git.geert+renesas@xxxxxxxxx
https://lore.kernel.org/r/c6e1331b9bef61225fa4c09db3ba3e2e7214ba2d.1663598886.git.geert+renesas@xxxxxxxxx

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux