From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Move including the rzg2lc-smarc-som.dtsi from the carrier board
rzg2lc-smarc.dtsi to the actual RZ/G2LC SMARC EVK board dts
r9a07g044c2-smarc.dts. Also move the SW1 related macros along with
PMOD1_SER0 to board dts so that we have all the configuration options
in the same file.
This patch is to keep consistency with other SMARC EVKs (RZ/G2L, RZ/G2UL)
and it makes sense not include the SoM into the carrier board as we might
in future have a different carrier board with the same SoM.
Suggested-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
.../boot/dts/renesas/r9a07g044c2-smarc.dts | 30 +++++++++++++++++++
arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi | 28 -----------------
2 files changed, 30 insertions(+), 28 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
index fc34058002e2..f67a6f125d9c 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
@@ -6,7 +6,37 @@
*/
/dts-v1/;
+
+/*
+ * DIP-Switch SW1 setting on SoM
+ * 1 : High; 0: Low
+ * SW1-2 : SW_SD0_DEV_SEL (1: eMMC; 0: uSD)
+ * SW1-3 : SW_SCIF_CAN (1: CAN1; 0: SCIF1)
+ * SW1-4 : SW_RSPI_CAN (1: CAN1; 0: RSPI1)
+ * SW1-5 : SW_I2S0_I2S1 (1: I2S2 (HDMI audio); 0: I2S0)
+ * Please change below macros according to SW1 setting
+ */
+
+#define SW_SD0_DEV_SEL 1
+
+#define SW_SCIF_CAN 0
+#if (SW_SCIF_CAN)
+/* Due to HW routing, SW_RSPI_CAN is always 0 when SW_SCIF_CAN is set to 1 */
+#define SW_RSPI_CAN 0
+#else
+/* Please set SW_RSPI_CAN. Default value is 1 */
+#define SW_RSPI_CAN 1
+#endif
+
+#if (SW_SCIF_CAN && SW_RSPI_CAN)
+#error "Can not set 1 to both SW_SCIF_CAN and SW_RSPI_CAN due to HW routing"
+#endif
+
+/* comment the #define statement to disable SCIF1 (SER0) on PMOD1 (CN7) */
+#define PMOD1_SER0 1
+
#include "r9a07g044c2.dtsi"
+#include "rzg2lc-smarc-som.dtsi"
#include "rzg2lc-smarc.dtsi"
/ {
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
index 6be25a8a28db..b6bd27196d88 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
@@ -8,37 +8,9 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
-/*
- * DIP-Switch SW1 setting on SoM
- * 1 : High; 0: Low
- * SW1-2 : SW_SD0_DEV_SEL (1: eMMC; 0: uSD)
- * SW1-3 : SW_SCIF_CAN (1: CAN1; 0: SCIF1)
- * SW1-4 : SW_RSPI_CAN (1: CAN1; 0: RSPI1)
- * SW1-5 : SW_I2S0_I2S1 (1: I2S2 (HDMI audio); 0: I2S0)
- * Please change below macros according to SW1 setting
- */
-
-#define SW_SD0_DEV_SEL 1
-
-#define SW_SCIF_CAN 0
-#if (SW_SCIF_CAN)
-/* Due to HW routing, SW_RSPI_CAN is always 0 when SW_SCIF_CAN is set to 1 */
-#define SW_RSPI_CAN 0
-#else
-/* Please set SW_RSPI_CAN. Default value is 1 */
-#define SW_RSPI_CAN 1
-#endif
-
-#if (SW_SCIF_CAN && SW_RSPI_CAN)
-#error "Can not set 1 to both SW_SCIF_CAN and SW_RSPI_CAN due to HW routing"
-#endif
-
-#include "rzg2lc-smarc-som.dtsi"
#include "rzg2lc-smarc-pinfunction.dtsi"
#include "rz-smarc-common.dtsi"
-/* comment the #define statement to disable SCIF1 (SER0) on PMOD1 (CN7) */
-#define PMOD1_SER0 1
/ {
aliases {
--
2.25.1
