RE: [PATCH] mmc: renesas_sdhi: Add margins for main clock and hs clock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert,

> Subject: RE: [PATCH] mmc: renesas_sdhi: Add margins for main clock and
> hs clock
> 
> Hi Geert,
> 
> Thanks for the feedback.
> 
> > Subject: Re: [PATCH] mmc: renesas_sdhi: Add margins for main clock
> and
> > hs clock
> >
> > Hi Biju,
> >
> > On Wed, Sep 14, 2022 at 6:44 AM Biju Das
> <biju.das.jz@xxxxxxxxxxxxxx>
> > wrote:
> > > > Subject: RE: [PATCH] mmc: renesas_sdhi: Add margins for main
> clock
> > > > and hs clock
> > > > > Subject: Re: [PATCH] mmc: renesas_sdhi: Add margins for main
> > clock
> > > > > and hs clock On Tue, Sep 13, 2022 at 5:15 PM Biju Das
> > > > > <biju.das.jz@xxxxxxxxxxxxxx>
> > > > > wrote:
> > > > > > The SDHI high speed clock is 4 times that of the main clock.
> > > > > > Currently, there is no margin added for setting the rate
> > > > > > associated with these clocks. On RZ/G2L platforms, the lack
> of
> > > > > > these margins leads to the selection of a clock source with
> a
> > > > > > lower clock rate compared to a higher one.
> > > > > >
> > > > > > RZ/G2L example case:
> > > > > > SD0 hs clock is 533333333 Hz and SD0 main clock is 133333333
> > Hz.
> > > > > > When we set the rate for the main clock 133333333, the
> request
> > > > > > rate for the parent becomes 533333332 (133333333 * 4) and
> the
> > > > > > SD0 hs clock is set as 400000000 Hz.
> > > > > >
> > > > > > This patch adds a margin of (1/1024) higher hs clock and
> main
> > > > > > clock
> > > > > rate.
> > > > > >
> > > > > > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > > > >
> > > > > Thanks for your patch!
> > > > >
> > > > > > --- a/drivers/mmc/host/renesas_sdhi_core.c
> > > > > > +++ b/drivers/mmc/host/renesas_sdhi_core.c
> > > > > > @@ -147,6 +147,7 @@ static unsigned int
> > > > > > renesas_sdhi_clk_update(struct
> > > > > tmio_mmc_host *host,
> > > > > >         }
> > > > > >
> > > > > >         new_clock = wanted_clock << clkh_shift;
> > > > > > +       new_clock += new_clock >> 10;
> > > > >
> > > > > This changes the requested clock rate. Is that really a good
> > idea?
> > > > >
> > > > > Isn't it sufficient to change the test "if (freq > (new_clock
> <<
> > i))"
> > > > > slightly?
> > > >
> > > > We hardly enter this test, after it request for proper
> wanted_clk.
> > > >
> > > > freq is clk_round_rate(ref_clk, new_clock << i);  and it
> compares
> > > > 400MHz vs 533.332 MHz.
> > > >
> > > > Basically wanted_clock= 133.33333 MHz and is scaled to power of
> 2
> > > > and then each iteration it scale down to power of 2 compare with
> > > > round rate value.
> > > >
> > > > [    4.020781] ####rzg2l_cpg_sd_clk_mux_determine_rate#######
> req-
> > > > >rate=4266666656
> > > > [    4.028013] ####rzg2l_cpg_sd_clk_mux_determine_rate#######
> req-
> > > > >rate=2133333328
> > > > [    4.035330] ####rzg2l_cpg_sd_clk_mux_determine_rate#######
> req-
> > > > >rate=1066666664
> > > > [    4.042639] ####rzg2l_cpg_sd_clk_mux_determine_rate#######
> req-
> > > > >rate=533333332
> > > >
> > > > >
> > > > > >
> > > > > >         /*
> > > > > >          * We want the bus clock to be as close as possible
> > to,
> > > > > > but no @@ -172,6 +173,7 @@ static unsigned int
> > > > > > renesas_sdhi_clk_update(struct tmio_mmc_host *host,
> > > > > >
> > > > > >         clk_set_rate(ref_clk, best_freq);
> > > > > >
> > > > > > +       best_freq += best_freq >> 10;
> > > > >
> > > > > Can you please elaborate why this is needed?
> > > > > It looks counter-intuitive to me.
> > > >
> > > > When we try to set 133.333 MHz clk, the determine rate
> calculates
> > > > req-
> > > > >rate for sd clk as 533.332 and since available clock source for
> > sd0
> > > > >clks
> > > > are 266.6666, 400 and
> > > > 533.333 MHz, so it select the clock source as 400MHz.
> > >
> > > Just to add here the main issue is coming from math calculation.
> > >
> > > Consider any value A
> > >
> > > B = A / 4
> > > C = B * 4
> > >
> > > Ideally, we expect A = C, But in the below example It is not the
> > case
> > > (it is A != C).
> > >
> > > A = 533333333 (1600/3 MHz)
> > > B = 533333333/4 = 133333333
> > > C = 133333333 * 4 = 533333332
> > >
> > > Since A != C we are ending up in this situation.
> >
> > I am fully aware of that ;-)
> >
> > However, clk_round_rate() is supposed to return the closest matching
> > rate.  Hence when passed 533333332, it should return 533333333.
> 
> No, it is returning 400000000.as ref_clk->rate=400000000, and new clk
> rate 533333332
> 
> [    4.524188] ###renesas_sdhi_clk_update ++ ###
> 400000000/533333333/533333332
> [    4.531217] ###renesas_sdhi_clk_update -- ###
> 400000000/400000000/533333332
> 
> +               pr_err("###%s ++ ### %llu/%llu/%llu", __func__,
> + clk_get_rate(ref_clk),freq, new_clock << i);
>                 freq = clk_round_rate(ref_clk, new_clock << i);
> +               pr_err("###%s -- ### %llu/%llu/%llu", __func__,
> + clk_get_rate(ref_clk),freq, new_clock << i);
> 
> > AFAIU, this is then rejected by "if (freq > (new_clock << i))", due
> to
> > being slightly too large, causing 400000000 to be picked instead.
> >
> > Am I missing something?
> 
> With the above, it skips the if statement
> 
> > I'm currently not in the position to test/verify what is actually
> > happening.
> 
> OK Will check.

I have patched SDHI driver to allow margin, so that it won't set a lower clock
and added round clock operation in Clock driver for rounding operation.
with that I get proper rates.

Is this solution acceptable or not?

[1]
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index 6edbf5c161ab..bb7a736d46a2 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -128,6 +128,7 @@ static unsigned int renesas_sdhi_clk_update(struct tmio_mmc_host *host,
        struct clk *ref_clk = priv->clk;
        unsigned int freq, diff, best_freq = 0, diff_min = ~0;
        unsigned int new_clock, clkh_shift = 0;
+       unsigned int new_clock_margin;
        int i;
 
        /*
@@ -155,8 +156,13 @@ static unsigned int renesas_sdhi_clk_update(struct tmio_mmc_host *host,
         * possible, but no greater than, new_clock << i.
         */
        for (i = min(9, ilog2(UINT_MAX / new_clock)); i >= 0; i--) {
-               freq = clk_round_rate(ref_clk, new_clock << i);
-               if (freq > (new_clock << i)) {
+               if (freq <= (new_clock << i))
+                       freq = clk_round_rate(ref_clk, new_clock << i);
+
+               new_clock_margin = (new_clock << i);
+               new_clock_margin += new_clock_margin >> 10;
+
+               if (freq > new_clock_margin) {
                        /* Too fast; look for a slightly slower option */
                        freq = clk_round_rate(ref_clk, (new_clock << i) / 4 * 3);
                        if (freq > (new_clock << i))

[2]
+static inline bool is_better_rate(unsigned long req, unsigned long best,
+                                 unsigned long new)
+{
+       return (req <= new && new < best) || (best < req && best < new);
+}
+
 static int rzg2l_cpg_sd_clk_mux_determine_rate(struct clk_hw *hw,
                                               struct clk_rate_request *req)
 {
-       return clk_mux_determine_rate_flags(hw, req, 0);
+       unsigned int i;
+       unsigned long actual_rate, best_rate = 0;
+       unsigned long req_rate = req->rate;
+
+       for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
+               struct clk_hw *parent = clk_hw_get_parent_by_index(hw, i);
+               unsigned long parent_rate = clk_hw_get_rate(parent);
+
+               actual_rate = clk_hw_round_rate(parent, req_rate);
+
+               if (is_better_rate(req_rate, best_rate, actual_rate)) {
+                       best_rate = actual_rate;
+                       req->rate = best_rate;
+                       req->best_parent_rate = parent_rate;
+                       req->best_parent_hw = parent;
+               }
+       }
+
+       if (!best_rate)
+               return -EINVAL;
+
+       return 0;
 }
 
 static int rzg2l_cpg_sd_clk_mux_set_parent(struct clk_hw *hw, u8 index)

Cheers,
Biju




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux