This patch series aims to support the MIPI DSI encoder found in the RZ/G2L
SoC. It currently supports DSI mode only.
This unit supports MIPI Alliance Specification for Display Serial Interface (DSI)
Specification. This unit provides a solution for transmitting MIPI DSI compliant
digital video and packets. Normative References are below.
* MIPI Alliance Specification for Display Serial Interface Version 1.3.1
* MIPI Alliance Specification for D-PHY Version 2.1
The following are key features of this unit.
* 1 channel
* The number of Lane: 4-lane
* Support up to Full HD (1920 × 1080), 60 fps (RGB888)
* Maximum Bandwidth: 1.5 Gbps per lane
* Support Output Data Format: RGB666 / RGB888
v4->v5:
* Added Ack from Sam.
* Added a trivial change, replaced rzg2l_mipi_dsi_parse_dt()
with drm_of_get_data_lanes_count_ep() in probe.
v3->v4:
* Updated error handling in rzg2l_mipi_dsi_startup() and rzg2l_mipi_dsi_atomic_enable().
v2->v3:
* Added Rb tag from Geert and Laurent
* Fixed the typo "Receive" -> "transmit"
* Added accepible values for data-lanes
* Sorted Header file in the example
* Added SoC specific compaible along with generic one.
* pass rzg2l_mipi_dsi pointer to {Link,Phy} register rd/wr function instead
of the memory pointer
* Fixed the comment in rzg2l_mipi_dsi_startup()
* Removed unnecessary dbg message from rzg2l_mipi_dsi_start_video()
* DRM bridge parameter initialization moved to probe
* Replaced dev_dbg->dev_err in rzg2l_mipi_dsi_parse_dt()
* Inserted the missing blank lane after return in probe()
* Added missing MODULE_DEVICE_TABLE
* Added include linux/bits.h in header file
* Fixed various macros in header file.
* Reorder the make file for DSI, so that it is no more dependent
on RZ/G2L DU patch series.
v1->v2:
* Added full path for dsi-controller.yaml
* Modeled DSI + D-PHY as single block and updated reg property
* Fixed typo D_PHY->D-PHY
* Updated description
* Added interrupts and interrupt-names and updated the example
* Driver rework based on dt-binding changes (DSI + D-PHY) as single block
* Replaced link_mmio and phy_mmio with mmio in struct rzg2l_mipi_dsi
* Replaced rzg2l_mipi_phy_write with rzg2l_mipi_dsi_phy_write
and rzg2l_mipi_dsi_link_write
* Replaced rzg2l_mipi_phy_read->rzg2l_mipi_dsi_link_read
RFC->v1:
* Added a ref to dsi-controller.yaml.
* Added "depends on ARCH_RENESAS || COMPILE_TEST" on KCONFIG
and dropped DRM as it is implied by DRM_BRIDGE
* Used devm_reset_control_get_exclusive() for reset handle
* Removed bool hsclkmode from struct rzg2l_mipi_dsi
* Added error check for pm, using pm_runtime_resume_and_get() instead of
pm_runtime_get_sync()
* Added check for unsupported formats in rzg2l_mipi_dsi_host_attach()
* Avoided read-modify-write stopping hsclock
* Used devm_platform_ioremap_resource for resource allocation
* Removed unnecessary assert call from probe and remove.
* wrap the line after the PTR_ERR() in probe()
* Updated reset failure messages in probe
* Fixed the typo arstc->prstc
* Made hex constants to lower case.
RFC:
* https://patchwork.kernel.org/project/linux-renesas-soc/patch/20220112174612.10773-22-biju.das.jz@xxxxxxxxxxxxxx/
* https://patchwork.kernel.org/project/linux-renesas-soc/patch/20220112174612.10773-23-biju.das.jz@xxxxxxxxxxxxxx/
Biju Das (2):
dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX bindings
drm: rcar-du: Add RZ/G2L DSI driver
.../bindings/display/bridge/renesas,dsi.yaml | 182 +++++
drivers/gpu/drm/rcar-du/Kconfig | 8 +
drivers/gpu/drm/rcar-du/Makefile | 2 +
drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c | 690 ++++++++++++++++++
drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h | 151 ++++
5 files changed, 1033 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
create mode 100644 drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c
create mode 100644 drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h
--
2.25.1
