Re: [PATCH v3 5/5] drm: rcar-du: dsi: Fix VCLKSET write

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22/08/2022 17:45, Laurent Pinchart wrote:
Hi Tomi,

Thank you for the patch.

On Mon, Aug 22, 2022 at 05:34:01PM +0300, Tomi Valkeinen wrote:
From: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>

rcar_mipi_dsi_startup() writes correct values to VCLKSET, but as it uses
or-operation to add the new values to the current value in the register,
it should first make sure the fields are cleared.

Do this by using rcar_mipi_dsi_write() to write the VCLKSET_CKEN bit to
VCLKSET before the rest of the VCLKSET configuration.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>
---
  drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c | 7 ++++---
  1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
index 06250f2f3499..b60a6d4a5d46 100644
--- a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
+++ b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
@@ -412,9 +412,10 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
  			return ret;
  	}
- /* Enable DOT clock */
-	vclkset = VCLKSET_CKEN;
-	rcar_mipi_dsi_set(dsi, VCLKSET, vclkset);
+	/* Clear VCLKSET and enable DOT clock */
+	rcar_mipi_dsi_write(dsi, VCLKSET, VCLKSET_CKEN);
+
+	vclkset = 0;
if (dsi_format == 24)
  		vclkset |= VCLKSET_BPP_24;

You can replace one more set() with a write():

That's true. I'll send a new one.

diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
index 06250f2f3499..2744ea23e6f6 100644
--- a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
+++ b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
@@ -414,7 +414,7 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,

  	/* Enable DOT clock */
  	vclkset = VCLKSET_CKEN;
-	rcar_mipi_dsi_set(dsi, VCLKSET, vclkset);
+	rcar_mipi_dsi_write(dsi, VCLKSET, vclkset);

  	if (dsi_format == 24)
  		vclkset |= VCLKSET_BPP_24;
@@ -429,7 +429,7 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
  	vclkset |= VCLKSET_COLOR_RGB | VCLKSET_DIV(setup_info.div)
  		|  VCLKSET_LANE(dsi->lanes - 1);

-	rcar_mipi_dsi_set(dsi, VCLKSET, vclkset);
+	rcar_mipi_dsi_write(dsi, VCLKSET, vclkset);

  	/* After setting VCLKSET register, enable VCLKEN */
  	rcar_mipi_dsi_set(dsi, VCLKEN, VCLKEN_CKEN);

I'll apply patches 1/5 to 4/5 to my tree already.

I'm not sure if 4 works correctly without 2.

 Tomi



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux