Refresh the defconfig for Renesas ARM systems:
- Enable RZ/N1 A5PSW Ethernet switch support incl. dependencies
(RZN1D-DB),
- Move CONFIG_CAN_RCAR=y (moved in commit d7786af59860a113 ("net:
Kconfig: move the CAN device menu to the "Device Drivers"
section")),
- Enable RZ/N1 Gigabit Ethernet MAC support (RZN1D-DB),
- Enable RZ/N1 Pin control support (RZN1D-DB),
- Enable RZ/N1 DMA support incl. dependencies (RZN1D-DB).
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index a29bebb3742ed386..ebdac79c10f5564e 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -32,8 +32,8 @@ CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
+CONFIG_NET_DSA=y
CONFIG_CAN=y
-CONFIG_CAN_RCAR=y
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_RCAR_GEN2=y
@@ -52,11 +52,14 @@ CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
CONFIG_SATA_RCAR=y
CONFIG_NETDEVICES=y
+CONFIG_NET_DSA_RZN1_A5PSW=y
CONFIG_SH_ETH=y
CONFIG_RAVB=y
CONFIG_SMSC911X=y
+CONFIG_STMMAC_ETH=y
CONFIG_MICREL_PHY=y
CONFIG_SMSC_PHY=y
+CONFIG_CAN_RCAR=y
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
@@ -91,6 +94,7 @@ CONFIG_SPI_SH_MSIOF=y
CONFIG_SPI_SH_HSPI=y
CONFIG_PINCTRL_RZA1=y
CONFIG_PINCTRL_RZA2=y
+CONFIG_PINCTRL_RZN1=y
CONFIG_GPIO_EM=y
CONFIG_GPIO_RCAR=y
CONFIG_GPIO_PCA953X=y
@@ -180,6 +184,8 @@ CONFIG_RTC_DRV_DA9063=y
CONFIG_RTC_DRV_SH=y
CONFIG_RTC_DRV_RZN1=y
CONFIG_DMADEVICES=y
+CONFIG_DW_DMAC=y
+CONFIG_RZN1_DMAMUX=y
CONFIG_RCAR_DMAC=y
CONFIG_RENESAS_USB_DMAC=y
CONFIG_STAGING=y
--
2.25.1
