Re: [PATCH v2 2/3] drm: rcar-du: Add DRM_MODE_BLEND_PREMULTI support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,

> 2022/08/19 11:08、Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>のメール:
> 
> Hello Hayama-san,
> 
> Thank you for the patch.
> 
> On Wed, Aug 10, 2022 at 05:37:10PM +0900, Takanari Hayama wrote:
>> R-Car DU driver implicitly supports DRM_MODE_BLEND_COVERAGE only.
>> This adds a support for DRM_MODE_BLEND_PREMULTI. As a consequence,
>> DRM_MODE_BLEND_PREMULTI becomes the default. If DRM_MODE_BLEND_COVERAGE
>> is desired, it should be set explicitly.
>> 
>> This behavior comes from how DRM blend mode is supported.
>> drm_plane_create_blend_mode_property() creates the blend mode property
>> with the default value of DRM_MODE_BLEND_PREMULTI. This default value
>> cannot be modified from the atomic driver.
>> 
>> Signed-off-by: Takanari Hayama <taki@xxxxxxxxxx>
>> ---
>> drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 6 ++++++
>> 1 file changed, 6 insertions(+)
>> 
>> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
>> index 8eb9b2b097ae..b9580fcfec7a 100644
>> --- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
>> +++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
>> @@ -167,6 +167,8 @@ static void rcar_du_vsp_plane_setup(struct rcar_du_vsp_plane *plane)
>> 		cfg.mem[i] = sg_dma_address(state->sg_tables[i].sgl)
>> 			   + fb->offsets[i];
>> 
>> +	cfg.premult = (state->state.pixel_blend_mode == DRM_MODE_BLEND_PREMULTI);
> 
> I'll drop the parentheses here too, and if you don't mind, I'll move
> this down after setting cfg.pixelformat, as premult qualifies the format
> so it's more logical in that reading order (no change on the behaviour
> of course).

Thank you. I also agree with the proposed change in order.

> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> 
>> +
>> 	format = rcar_du_format_info(state->format->fourcc);
>> 	cfg.pixelformat = format->v4l2;
>> 
>> @@ -444,6 +446,10 @@ int rcar_du_vsp_init(struct rcar_du_vsp *vsp, struct device_node *np,
>> 						       num_planes - 1);
>> 		}
>> 
>> +		drm_plane_create_blend_mode_property(&plane->plane,
>> +					BIT(DRM_MODE_BLEND_PREMULTI) |
>> +					BIT(DRM_MODE_BLEND_COVERAGE));
>> +
>> 		vsp->num_planes++;
>> 	}
>> 
> 
> -- 
> Regards,
> 
> Laurent Pinchart

Cheers,
Takanari Hayama, Ph.D. <taki@xxxxxxxxxx>
IGEL Co., Ltd.
https://www.igel.co.jp/





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux