Add initial device tree for Renesas RZ/Five RISC-V CPU Core (AX45MP
Single).
Below is the list of IP blocks added in the initial SoC DTSI which can be
used to boot via initramfs on RZ/Five SMARC EVK:
- AX45MP CPU
- CPG
- PINCTRL
- PLIC
- SCIF0
- SYSC
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
v1->v2
* Dropped including makefile change
* Updated ndev count
---
arch/riscv/boot/dts/renesas/r9a07g043.dtsi | 121 +++++++++++++++++++++
1 file changed, 121 insertions(+)
create mode 100644 arch/riscv/boot/dts/renesas/r9a07g043.dtsi
diff --git a/arch/riscv/boot/dts/renesas/r9a07g043.dtsi b/arch/riscv/boot/dts/renesas/r9a07g043.dtsi
new file mode 100644
index 000000000000..b288d2607796
--- /dev/null
+++ b/arch/riscv/boot/dts/renesas/r9a07g043.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/Five SoC
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/r9a07g043-cpg.h>
+
+/ {
+ compatible = "renesas,r9a07g043";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
+ extal_clk: extal-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ timebase-frequency = <24000000>;
+
+ ax45mp: cpu@0 {
+ compatible = "andestech,ax45mp", "riscv";
+ device_type = "cpu";
+ reg = <0x0>;
+ status = "okay";
+ riscv,isa = "rv64imafdc";
+ mmu-type = "riscv,sv39";
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <0x40>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <0x40>;
+ clocks = <&cpg CPG_CORE R9A07G043_AX45MP_CORE0_CLK>,
+ <&cpg CPG_CORE R9A07G043_AX45MP_ACLK>;
+
+ cpu0_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&plic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ scif0: serial@1004b800 {
+ compatible = "renesas,scif-r9a07g043",
+ "renesas,scif-r9a07g044";
+ reg = <0 0x1004b800 0 0x400>;
+ interrupts = <412 IRQ_TYPE_LEVEL_HIGH>,
+ <414 IRQ_TYPE_LEVEL_HIGH>,
+ <415 IRQ_TYPE_LEVEL_HIGH>,
+ <413 IRQ_TYPE_LEVEL_HIGH>,
+ <416 IRQ_TYPE_LEVEL_HIGH>,
+ <416 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi",
+ "bri", "dri", "tei";
+ clocks = <&cpg CPG_MOD R9A07G043_SCIF0_CLK_PCK>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G043_SCIF0_RST_SYSTEM_N>;
+ status = "disabled";
+ };
+
+ cpg: clock-controller@11010000 {
+ compatible = "renesas,r9a07g043-cpg";
+ reg = <0 0x11010000 0 0x10000>;
+ clocks = <&extal_clk>;
+ clock-names = "extal";
+ #clock-cells = <2>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ sysc: system-controller@11020000 {
+ compatible = "renesas,r9a07g043-sysc";
+ reg = <0 0x11020000 0 0x10000>;
+ status = "disabled";
+ };
+
+ pinctrl: pinctrl@11030000 {
+ compatible = "renesas,r9a07g043-pinctrl";
+ reg = <0 0x11030000 0 0x10000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ gpio-ranges = <&pinctrl 0 0 152>;
+ clocks = <&cpg CPG_MOD R9A07G043_GPIO_HCLK>;
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G043_GPIO_RSTN>,
+ <&cpg R9A07G043_GPIO_PORT_RESETN>,
+ <&cpg R9A07G043_GPIO_SPARE_RESETN>;
+ };
+
+ plic: interrupt-controller@12c00000 {
+ compatible = "renesas,r9a07g043-plic", "andestech,nceplic100";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ riscv,ndev = <512>;
+ interrupt-controller;
+ reg = <0x0 0x12c00000 0 0x400000>;
+ clocks = <&cpg CPG_MOD R9A07G043_NCEPLIC_ACLK>;
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G043_NCEPLIC_ARESETN>;
+ interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9>;
+ };
+ };
+};
--
2.25.1
