Re: [PATCH 3/3] drm: rcar-du: Add DRM blend mode support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Hayama-san,

Thank you for the patch.

On Mon, Jul 04, 2022 at 11:52:31AM +0900, Takanari Hayama wrote:
> R-Car DU supports different blend modes via VSP1. Add DRM blend mode
> supports to make it configurable.
> 
> As drm_plane_create_blend_mode_property() creates the blend mode
> property with the default value of DRM_MODE_BLEND_PREMULTI, it changes
> the default blending behavior on R-Car DU. The rcar-du's blend mode was
> same as DRM_MODE_BLEND_COVERAGE, i.e., pixel color values have not been
> pre-multitplied.

If that's what KMS userspace requires I'm fine with it.

> Signed-off-by: Takanari Hayama <taki@xxxxxxxxxx>

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

but I expect this patch to change based on my suggestions for 2/3.

> ---
>  drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
> index 8eb9b2b097ae..283327046aa5 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
> @@ -170,6 +170,18 @@ static void rcar_du_vsp_plane_setup(struct rcar_du_vsp_plane *plane)
>  	format = rcar_du_format_info(state->format->fourcc);
>  	cfg.pixelformat = format->v4l2;
>  
> +	switch (state->state.pixel_blend_mode) {
> +	case DRM_MODE_BLEND_PREMULTI:
> +		cfg.blend_mode = VSP1_DU_BLEND_MODE_PREMULTI;
> +		break;
> +	case DRM_MODE_BLEND_COVERAGE:
> +		cfg.blend_mode = VSP1_DU_BLEND_MODE_COVERAGE;
> +		break;
> +	case DRM_MODE_BLEND_PIXEL_NONE:
> +		cfg.blend_mode = VSP1_DU_BLEND_MODE_PIXEL_NONE;
> +		break;
> +	}
> +
>  	vsp1_du_atomic_update(plane->vsp->vsp, crtc->vsp_pipe,
>  			      plane->index, &cfg);
>  }
> @@ -444,6 +456,11 @@ int rcar_du_vsp_init(struct rcar_du_vsp *vsp, struct device_node *np,
>  						       num_planes - 1);
>  		}
>  
> +		drm_plane_create_blend_mode_property(&plane->plane,
> +					BIT(DRM_MODE_BLEND_PIXEL_NONE) |
> +					BIT(DRM_MODE_BLEND_PREMULTI) |
> +					BIT(DRM_MODE_BLEND_COVERAGE));
> +
>  		vsp->num_planes++;
>  	}
>  

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux