Hi Geert,
On 21 July 2022 13:43 Geert Uytterhoeven wrote:
> On Thu, Jul 21, 2022 at 2:25 PM Phil Edworthy wrote:
> > On 21 July 2022 13:10 Geert Uytterhoeven wrote:
> > > On Mon, Jul 18, 2022 at 3:45 PM Phil Edworthy wrote:
> > > > RZ/V2M (r9a09g011) has a few differences:
> > > > - The USB3_DRD_CON register has moved, its called USB_PERI_DRD_CON
> in
> > > > the RZ/V2M hardware manual.
> > > > It has additional bits for host and peripheral reset that need to
> > > > cleared to use usb host and peripheral respectively.
> > > > - The USB3_OTG_STA, USB3_OTG_INT_STA and USB3_OTG_INT_ENA registers
> > > > have been moved and renamed to USB_PERI_DRD_STA,
> USB_PERI_DRD_INT_STA
> > > > and USB_PERI_DRD_INT_E.
> > > > - The IDMON bit used in the above regs for role detection have
> moved
> > > > from bit 4 to bit 0.
> > > > - RZ/V2M has an separate interrupt for DRD, i.e. for changes to
> IDMON.
> > > > - There are reset lines for DRD and USBP
> > > > - There is another clock, managed by runtime PM.
> > > >
> > > > Signed-off-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
> > > > Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > >
> > > Thanks for your patch!
> > >
> > > > --- a/drivers/usb/gadget/udc/renesas_usb3.c
> > > > +++ b/drivers/usb/gadget/udc/renesas_usb3.c
> > >
> > > > @@ -363,6 +368,7 @@ struct renesas_usb3 {
> > > > bool forced_b_device;
> > > > bool start_to_connect;
> > > > bool role_sw_by_connector;
> > > > + bool r9a09g011;
> > >
> > > Any better name for this feature flag?
> > Nothing springs to mind. We could use separate flags for has_resets,
> > has_drd_irq, max_nr_pipes but I am struggling to come up with names
> > for the offset registers and moved bits. Any suggestions?
>
> OK, so "is_rzv2m"?
Ok!
Thanks
Phil
