Re: [PATCH 5/5] arm64: dts: renesas: rzg2l-smarc-som: Add PHY interrupt support for ETH{0/1}

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert,

On Thu, Jul 21, 2022 at 12:59 PM Geert Uytterhoeven
<geert@xxxxxxxxxxxxxx> wrote:
>
> Hi Prabhakar,
>
> On Thu, Jul 21, 2022 at 1:55 PM Lad, Prabhakar
> <prabhakar.csengg@xxxxxxxxx> wrote:
> > On Thu, Jul 21, 2022 at 12:43 PM Geert Uytterhoeven
> > <geert@xxxxxxxxxxxxxx> wrote:
> > > On Thu, Jul 21, 2022 at 1:07 PM Lad, Prabhakar
> > > <prabhakar.csengg@xxxxxxxxx> wrote:
> > > > On Thu, Jul 21, 2022 at 11:47 AM Geert Uytterhoeven
> > > > <geert@xxxxxxxxxxxxxx> wrote:
> > > > > On Mon, Jul 18, 2022 at 9:57 PM Lad Prabhakar
> > > > > <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
> > > > > > The PHY interrupt (INT_N) pin is connected to IRQ2 and IRQ3 for ETH0
> > > > > > and ETH1 respectively.
> > > > > >
> > > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > > > >
> > > > > Thanks for your patch!
> > > > >
> > > > > > --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
> > > > > > +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
> > > > > > @@ -94,6 +94,8 @@ phy0: ethernet-phy@7 {
> > > > > >                 compatible = "ethernet-phy-id0022.1640",
> > > > > >                              "ethernet-phy-ieee802.3-c22";
> > > > > >                 reg = <7>;
> > > > > > +               interrupt-parent = <&irqc>;
> > > > > > +               interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> > > > >
> > > > > 2?
> > > > >
> > > > IRQ2 = SPI 3, the driver expects the SPI number and is used as index
> > > > [0] to map the interrupt in the GIC.
> > > >
> > > > [0] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/irqchip/irq-renesas-rzg2l.c?h=next-20220720#n291
> > >
> > > Using the SPI number sounds strange to me, as the consumer
> > > (Ethernet PHY) is linked to the IRQC, not to the GIC directly.
> > >
> > Right, are you suggesting that I tweak the driver? The other problem
> > is how do we differentiate NMI and IRQ0? How about we add macros for
> > IRQ0-7 and use them in the DTS?
> >
> > > > > "The first cell should contain external interrupt number (IRQ0-7)"
> > > > >
> > > > Probably I need to reword this to "The first cell should contain the
> > > > SPI number for IRQ0-7/NMI interrupt lines" ?
> > >
> > > Oh, so zero is the NMI?
> > > And 1-8 are IRQ0-7.
> > >
> > Yes that's right.
>
> I don't think it was ever mentioned that the NMI was exposed, too.
>
Sorry for not making this clearer.

> Using macros sounds fine to me.
>
Ok, I will send a v2 (just this patch alone) with the macros added as
a separate patch in rzg2l-pinctrl.h?

Cheers,
Prabhakar

> Gr{oetje,eeting}s,
>
>                         Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux