My Ebisu complains about the missing node when booting:
OF: graph: no port node found in /soc/i2c@e66d0000/codec@10
------------[ cut here ]------------
WARNING: CPU: 1 PID: 37 at sound/soc/codecs/ak4613.c:873 ak4613_i2c_probe+0x274/0x2a0
CPU: 1 PID: 37 Comm: kworker/u4:2 Not tainted 5.19.0-rc3-arm64-renesas-00003-g57c83727d651 #50
Hardware name: Renesas Ebisu board based on r8a77990 (DT)
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
Hi Morimoto-san, I have never done any sound stuff with R-Car. Is this
the correct approach which I copied over from Salvator boards?
All the best,
Wolfram
arch/arm64/boot/dts/renesas/ebisu.dtsi | 26 +++++++++++++++++++++-----
1 file changed, 21 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi
index 8fc03491a11c..cec23a3287c0 100644
--- a/arch/arm64/boot/dts/renesas/ebisu.dtsi
+++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi
@@ -478,6 +478,12 @@ ak4613: codec@10 {
asahi-kasei,out4-single-end;
asahi-kasei,out5-single-end;
asahi-kasei,out6-single-end;
+
+ port {
+ ak4613_endpoint: endpoint {
+ remote-endpoint = <&rsnd_endpoint0>;
+ };
+ };
};
cs2000: clk-multiplier@4f {
@@ -708,13 +714,23 @@ &rcar_sound {
<&audio_clk_a>, <&cs2000>, <&audio_clk_c>,
<&cpg CPG_CORE R8A77990_CLK_ZA2>;
- rcar_sound,dai {
- dai0 {
- playback = <&ssi0>, <&src0>, <&dvc0>;
- capture = <&ssi1>, <&src1>, <&dvc1>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rsnd_port0: port@0 {
+ reg = <0>;
+ rsnd_endpoint0: endpoint {
+ remote-endpoint = <&ak4613_endpoint>;
+
+ dai-format = "left_j";
+ bitclock-master = <&rsnd_endpoint0>;
+ frame-master = <&rsnd_endpoint0>;
+
+ playback = <&ssi0>, <&src0>, <&dvc0>;
+ capture = <&ssi1>, <&src1>, <&dvc1>;
+ };
};
};
-
};
&rpc {
--
2.35.1
