On Tue, Jun 21, 2022 at 03:01:45PM +0800, Liang He wrote: > In rcar_pcie_init(), we need to hold the reference returned by > of_find_matching_node() which is used to call of_node_put() for > refcount balance. > > Signed-off-by: Liang He <windhl@xxxxxxx> > --- > drivers/pci/controller/pcie-rcar-host.c | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > > diff --git a/drivers/pci/controller/pcie-rcar-host.c b/drivers/pci/controller/pcie-rcar-host.c > index 997c4df6a1e7..405ec3d64f30 100644 > --- a/drivers/pci/controller/pcie-rcar-host.c > +++ b/drivers/pci/controller/pcie-rcar-host.c > @@ -1158,7 +1158,10 @@ static const struct of_device_id rcar_pcie_abort_handler_of_match[] __initconst > > static int __init rcar_pcie_init(void) > { > - if (of_find_matching_node(NULL, rcar_pcie_abort_handler_of_match)) { > + struct device_node *np = of_find_matching_node(NULL, rcar_pcie_abort_handler_of_match); > + > + if (np) { > + of_node_put(np); I think this is correct, but it would be nicer to update the way this driver uses of_device_get_match_data(), e.g., struct rcar_variant { int (*phy_init_fn)(struct rcar_pcie_host *host); bool hook_abort; }; struct rcar_pcie_host { ... const struct rcar_variant *variant; }; static int rcar_pcie_probe(...) { host->variant = of_device_get_match_data(dev); err = host->variant->phy_init_fn(host); ... #ifdef CONFIG_ARM if (host->variant->hook_abort) { #ifdef CONFIG_ARM_LPAE hook_fault_code(17, ...); # else hook_fault_code(22, ...); #endif } #endif } Or keep the hook in a separate function called from rcar_pcie_probe() if you think that's cleaner. I'm not sure hook_fault_code() needs to be called separately as a device_initcall(). The pci-ixp4xx.c driver does it in ixp4xx_pci_probe(), so I assume rcar could do it in probe as well. > #ifdef CONFIG_ARM_LPAE > hook_fault_code(17, rcar_pcie_aarch32_abort_handler, SIGBUS, 0, > "asynchronous external abort"); > -- > 2.25.1 >