Add support for R-Car S4. The S4 IP differs a bit from its siblings in such way that it has 3 out of 4 TSC nodes for Linux and the interrupts are not routed to the INTC-AP but to the ECM. Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> --- Change since V2: * make interrupts not required for this SoC Tested with: make dtbs_check DT_SCHEMA_FILES=thermal/rcar-gen3-thermal.yaml .../bindings/thermal/rcar-gen3-thermal.yaml | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml index 72dc7eb27f8d..0f05f5c886c5 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml @@ -8,9 +8,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas R-Car Gen3 Thermal Sensor description: - On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal - sensors (THS) which are the analog circuits for measuring temperature (Tj) - inside the LSI. + On most R-Car Gen3 and later SoCs, the thermal sensor controllers (TSC) + control the thermal sensors (THS) which are the analog circuits for + measuring temperature (Tj) inside the LSI. maintainers: - Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx> @@ -27,6 +27,7 @@ properties: - renesas,r8a77965-thermal # R-Car M3-N - renesas,r8a77980-thermal # R-Car V3H - renesas,r8a779a0-thermal # R-Car V3U + - renesas,r8a779f0-thermal # R-Car S4-8 reg: true @@ -79,8 +80,16 @@ else: - description: TSC1 registers - description: TSC2 registers - description: TSC3 registers - required: - - interrupts + if: + not: + properties: + compatible: + contains: + enum: + - renesas,r8a779f0-thermal + then: + required: + - interrupts additionalProperties: false -- 2.35.1
