Add support for R-Car S4. The S4 IP differs a bit from its siblings in such way that it has 3 out of 4 TSC nodes for Linux and the interrupts are not routed to the INTC-AP but to the ECM. Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> --- Change since v1: * Describe that this SoC does not require interrupts (Thanks, Geert!) I hope dtbs_check is happy now. I can't test it because I get tons of python install errors when trying to update my dtschema :( .../devicetree/bindings/thermal/rcar-gen3-thermal.yaml | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml index 1368d90da0e8..08001d6fa67c 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml @@ -8,9 +8,10 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas R-Car Gen3 Thermal Sensor description: - On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal - sensors (THS) which are the analog circuits for measuring temperature (Tj) - inside the LSI. + + On most R-Car Gen3 and later SoCs, the thermal sensor controllers (TSC) + control the thermal sensors (THS) which are the analog circuits for + measuring temperature (Tj) inside the LSI. maintainers: - Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx> @@ -27,6 +28,7 @@ properties: - renesas,r8a77965-thermal # R-Car M3-N - renesas,r8a77980-thermal # R-Car V3H - renesas,r8a779a0-thermal # R-Car V3U + - renesas,r8a779f0-thermal # R-Car S4 reg: true @@ -63,6 +65,7 @@ if: contains: enum: - renesas,r8a779a0-thermal + - renesas,r8a779f0-thermal then: properties: reg: -- 2.35.1
