Hi Prabhakar,
On Tue, May 24, 2022 at 7:22 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
> The Renesas RZ/Five SoC has a RISC-V AX45MP AndesCore with NCEPLIC100. The
> NCEPLIC100 supports both edge-triggered and level-triggered interrupts. In
> case of edge-triggered interrupts NCEPLIC100 ignores the next interrupt
> edge until the previous completion message has been received and
> NCEPLIC100 doesn't support pending interrupt counter, hence losing the
> interrupts if not acknowledged in time.
>
> So the workaround for edge-triggered interrupts to be handled correctly
> and without losing is that it needs to be acknowledged first and then
> handler must be run so that we don't miss on the next edge-triggered
> interrupt.
>
> This patch adds a new compatible string for Renesas RZ/Five SoC and adds
> support to change interrupt flow based on the interrupt type. It also
> implements irq_ack and irq_set_type callbacks.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Thanks for your patch!
> --- a/drivers/irqchip/irq-sifive-plic.c
> +++ b/drivers/irqchip/irq-sifive-plic.c
> @@ -60,10 +60,13 @@
> #define PLIC_DISABLE_THRESHOLD 0x7
> #define PLIC_ENABLE_THRESHOLD 0
>
> +#define RENESAS_R9A07G043_PLIC 1
> +
> struct plic_priv {
> struct cpumask lmask;
> struct irq_domain *irqdomain;
> void __iomem *regs;
> + u8 of_data;
Usually it's cleaner to use feature bits instead of enum types.
> };
>
> struct plic_handler {
> @@ -163,10 +166,31 @@ static int plic_set_affinity(struct irq_data *d,
> }
> #endif
>
> +static void plic_irq_ack(struct irq_data *d)
> +{
> + struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
> +
No check for RZ/Five or irq type?
.irq_ack() seems to be called for level interrupts, too
(from handle_level_irq() through mask_ack_irq()).
> + if (irqd_irq_masked(d)) {
> + plic_irq_unmask(d);
> + writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM);
> + plic_irq_mask(d);
> + } else {
> + writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM);
> + }
> +}
The above is identical to the old plic_irq_eoi()...
> +
> static void plic_irq_eoi(struct irq_data *d)
> {
> struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
>
> + /*
> + * For Renesas R9A07G043 SoC if the interrupt type is EDGE
> + * we have already acknowledged it in ack callback.
> + */
> + if (handler->priv->of_data == RENESAS_R9A07G043_PLIC &&
> + !irqd_is_level_type(d))
> + return;
> +
... so you can just call into plic_irq_ack() here?
> if (irqd_irq_masked(d)) {
> plic_irq_unmask(d);
> writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM);
> @@ -176,11 +200,37 @@ static void plic_irq_eoi(struct irq_data *d)
> }
> }
>
> +static int plic_irq_set_type(struct irq_data *d, unsigned int type)
> +{
> + struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
> +
> + if (handler->priv->of_data != RENESAS_R9A07G043_PLIC)
> + return 0;
> +
> + switch (type) {
> + case IRQ_TYPE_LEVEL_HIGH:
> + irq_set_handler_locked(d, handle_fasteoi_irq);
> + break;
> +
> + case IRQ_TYPE_EDGE_RISING:
> + irq_set_handler_locked(d, handle_fasteoi_ack_irq);
> + break;
> +
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> static struct irq_chip plic_chip = {
I think this can be const.
> .name = "SiFive PLIC",
> .irq_mask = plic_irq_mask,
> .irq_unmask = plic_irq_unmask,
> + .irq_ack = plic_irq_ack,
This causes extra processing on non-affected PLICs.
Perhaps use a separate irq_chip instance?
> .irq_eoi = plic_irq_eoi,
> + .irq_set_type = plic_irq_set_type,
> +
> #ifdef CONFIG_SMP
> .irq_set_affinity = plic_set_affinity,
> #endif
> @@ -198,6 +248,19 @@ static int plic_irqdomain_map(struct irq_domain *d, unsigned int irq,
> return 0;
> }
>
> +static int plic_irq_domain_translate(struct irq_domain *d,
> + struct irq_fwspec *fwspec,
> + unsigned long *hwirq,
> + unsigned int *type)
> +{
> + struct plic_priv *priv = d->host_data;
> +
> + if (priv->of_data == RENESAS_R9A07G043_PLIC)
> + return irq_domain_translate_twocell(d, fwspec, hwirq, type);
> +
> + return irq_domain_translate_onecell(d, fwspec, hwirq, type);
This one clearly shows the discerning feature: onecell or twocell...
> +}
> +
> static int plic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> unsigned int nr_irqs, void *arg)
> {
> @@ -293,6 +356,9 @@ static int __init plic_init(struct device_node *node,
> if (!priv)
> return -ENOMEM;
>
> + if (of_device_is_compatible(node, "renesas-r9a07g043-plic"))
> + priv->of_data = RENESAS_R9A07G043_PLIC;
> +
So perhaps instead just look at #interrupt-cells, and use the onecell
or twocell irq_chip/irq_domain_ops based on that?
> priv->regs = of_iomap(node, 0);
> if (WARN_ON(!priv->regs)) {
> error = -EIO;
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
