From: Michel Pollet <michel.pollet@xxxxxxxxxxxxxx>
Add a basic RTC driver for the RZ/N1.
Signed-off-by: Michel Pollet <michel.pollet@xxxxxxxxxxxxxx>
Co-developed-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
drivers/rtc/Kconfig | 7 ++
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-rzn1.c | 246 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 254 insertions(+)
create mode 100644 drivers/rtc/rtc-rzn1.c
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 41c65b4d2baf..a00f901b5c1d 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1548,6 +1548,13 @@ config RTC_DRV_RS5C313
help
If you say yes here you get support for the Ricoh RS5C313 RTC chips.
+config RTC_DRV_RZN1
+ tristate "Renesas RZ/N1 RTC"
+ depends on ARCH_RZN1 || COMPILE_TEST
+ depends on OF && HAS_IOMEM
+ help
+ If you say yes here you get support for the Renesas RZ/N1 RTC.
+
config RTC_DRV_GENERIC
tristate "Generic RTC support"
# Please consider writing a new RTC driver instead of using the generic
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 2d827d8261d5..fb04467b652d 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -151,6 +151,7 @@ obj-$(CONFIG_RTC_DRV_RX6110) += rtc-rx6110.o
obj-$(CONFIG_RTC_DRV_RX8010) += rtc-rx8010.o
obj-$(CONFIG_RTC_DRV_RX8025) += rtc-rx8025.o
obj-$(CONFIG_RTC_DRV_RX8581) += rtc-rx8581.o
+obj-$(CONFIG_RTC_DRV_RZN1) += rtc-rzn1.o
obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o
obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o
obj-$(CONFIG_RTC_DRV_S5M) += rtc-s5m.o
diff --git a/drivers/rtc/rtc-rzn1.c b/drivers/rtc/rtc-rzn1.c
new file mode 100644
index 000000000000..1d4e7a782749
--- /dev/null
+++ b/drivers/rtc/rtc-rzn1.c
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Renesas RZ/N1 Real Time Clock interface for Linux
+ *
+ * Copyright:
+ * - 2014 Renesas Electronics Europe Limited
+ * - 2022 Schneider Electric
+ *
+ * Authors:
+ * - Michel Pollet <michel.pollet@xxxxxxxxxxxxxx>, <buserror@xxxxxxxxx>
+ * - Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
+ */
+
+#include <linux/bcd.h>
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/rtc.h>
+#include <linux/soc/renesas/r9a06g032-sysctrl.h>
+
+#define RZN1_RTC_CTL0 0x00
+#define RZN1_RTC_CTL0_SLSB_SUBU 0
+#define RZN1_RTC_CTL0_SLSB_SCMP BIT(4)
+#define RZN1_RTC_CTL0_AMPM BIT(5)
+#define RZN1_RTC_CTL0_CE BIT(7)
+
+#define RZN1_RTC_CTL1 0x04
+#define RZN1_RTC_CTL1_ALME BIT(4)
+
+#define RZN1_RTC_CTL2 0x08
+#define RZN1_RTC_CTL2_WAIT BIT(0)
+#define RZN1_RTC_CTL2_WST BIT(1)
+#define RZN1_RTC_CTL2_WUST BIT(5)
+#define RZN1_RTC_CTL2_STOPPED (RZN1_RTC_CTL2_WAIT | RZN1_RTC_CTL2_WST)
+
+#define RZN1_RTC_SEC 0x14
+#define RZN1_RTC_MIN 0x18
+#define RZN1_RTC_HOUR 0x1c
+#define RZN1_RTC_WEEK 0x20
+#define RZN1_RTC_DAY 0x24
+#define RZN1_RTC_MONTH 0x28
+#define RZN1_RTC_YEAR 0x2c
+
+#define RZN1_RTC_SUBU 0x38
+#define RZN1_RTC_SUBU_DEV BIT(7)
+#define RZN1_RTC_SUBU_DECR BIT(6)
+
+#define RZN1_RTC_ALM 0x40
+#define RZN1_RTC_ALH 0x44
+#define RZN1_RTC_ALW 0x48
+
+#define RZN1_RTC_SECC 0x4c
+#define RZN1_RTC_MINC 0x50
+#define RZN1_RTC_HOURC 0x54
+#define RZN1_RTC_WEEKC 0x58
+#define RZN1_RTC_DAYC 0x5c
+#define RZN1_RTC_MONTHC 0x60
+#define RZN1_RTC_YEARC 0x64
+
+struct rzn1_rtc {
+ struct rtc_device *rtcdev;
+ void __iomem *base;
+ struct clk *clk;
+};
+
+static void rzn1_rtc_get_time_snapshot(struct rzn1_rtc *rtc, struct rtc_time *tm)
+{
+ tm->tm_sec = readl(rtc->base + RZN1_RTC_SECC);
+ tm->tm_min = readl(rtc->base + RZN1_RTC_MINC);
+ tm->tm_hour = readl(rtc->base + RZN1_RTC_HOURC);
+ tm->tm_wday = readl(rtc->base + RZN1_RTC_WEEKC);
+ tm->tm_mday = readl(rtc->base + RZN1_RTC_DAYC);
+ tm->tm_mon = readl(rtc->base + RZN1_RTC_MONTHC);
+ tm->tm_year = readl(rtc->base + RZN1_RTC_YEARC);
+}
+
+static unsigned int rzn1_rtc_tm_to_wday(struct rtc_time *tm)
+{
+ time64_t time;
+ unsigned int days;
+ u32 secs;
+
+ time = rtc_tm_to_time64(tm);
+ days = div_s64_rem(time, 86400, &secs);
+
+ /* day of the week, 1970-01-01 was a Thursday */
+ return (days + 4) % 7;
+}
+
+static int rzn1_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct rzn1_rtc *rtc = dev_get_drvdata(dev);
+ u32 val, secs;
+
+ /*
+ * The RTC was not started or is stopped and thus does not carry the
+ * proper time/date.
+ */
+ val = readl(rtc->base + RZN1_RTC_CTL2);
+ if (val & RZN1_RTC_CTL2_STOPPED)
+ return -EINVAL;
+
+ rzn1_rtc_get_time_snapshot(rtc, tm);
+ secs = readl(rtc->base + RZN1_RTC_SECC);
+ if (tm->tm_sec != secs)
+ rzn1_rtc_get_time_snapshot(rtc, tm);
+
+ tm->tm_sec = bcd2bin(tm->tm_sec);
+ tm->tm_min = bcd2bin(tm->tm_min);
+ tm->tm_hour = bcd2bin(tm->tm_hour);
+ tm->tm_wday = bcd2bin(tm->tm_wday);
+ tm->tm_mday = bcd2bin(tm->tm_mday);
+ tm->tm_mon = bcd2bin(tm->tm_mon);
+ tm->tm_year = bcd2bin(tm->tm_year);
+
+ return 0;
+}
+
+static int rzn1_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct rzn1_rtc *rtc = dev_get_drvdata(dev);
+ u32 val;
+ int ret;
+
+ tm->tm_sec = bin2bcd(tm->tm_sec);
+ tm->tm_min = bin2bcd(tm->tm_min);
+ tm->tm_hour = bin2bcd(tm->tm_hour);
+ tm->tm_wday = bin2bcd(rzn1_rtc_tm_to_wday(tm));
+ tm->tm_mday = bin2bcd(tm->tm_mday);
+ tm->tm_mon = bin2bcd(tm->tm_mon);
+ tm->tm_year = bin2bcd(tm->tm_year);
+
+ val = readl(rtc->base + RZN1_RTC_CTL2);
+ if (!(val & RZN1_RTC_CTL2_STOPPED)) {
+ /* Hold the counter if it was counting up */
+ writel(RZN1_RTC_CTL2_WAIT, rtc->base + RZN1_RTC_CTL2);
+
+ /* Wait for the counter to stop: two 32k clock cycles */
+ usleep_range(61, 100);
+ ret = readl_poll_timeout(rtc->base + RZN1_RTC_CTL2, val,
+ val & RZN1_RTC_CTL2_WST, 0, 100);
+ if (ret)
+ return ret;
+ }
+
+ writel(tm->tm_sec, rtc->base + RZN1_RTC_SEC);
+ writel(tm->tm_min, rtc->base + RZN1_RTC_MIN);
+ writel(tm->tm_hour, rtc->base + RZN1_RTC_HOUR);
+ writel(tm->tm_wday, rtc->base + RZN1_RTC_WEEK);
+ writel(tm->tm_mday, rtc->base + RZN1_RTC_DAY);
+ writel(tm->tm_mon, rtc->base + RZN1_RTC_MONTH);
+ writel(tm->tm_year, rtc->base + RZN1_RTC_YEAR);
+ writel(0, rtc->base + RZN1_RTC_CTL2);
+
+ return 0;
+}
+
+static const struct rtc_class_ops rzn1_rtc_ops = {
+ .read_time = rzn1_rtc_read_time,
+ .set_time = rzn1_rtc_set_time,
+};
+
+static int rzn1_rtc_probe(struct platform_device *pdev)
+{
+ struct rzn1_rtc *rtc;
+ int ret;
+
+ rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+ if (!rtc)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, rtc);
+
+ rtc->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(rtc->base))
+ return dev_err_probe(&pdev->dev, PTR_ERR(rtc->base), "Missing reg\n");
+
+ rtc->rtcdev = devm_rtc_allocate_device(&pdev->dev);
+ if (IS_ERR(rtc->rtcdev))
+ return PTR_ERR(rtc);
+
+ rtc->rtcdev->range_min = RTC_TIMESTAMP_BEGIN_2000;
+ rtc->rtcdev->range_max = RTC_TIMESTAMP_END_2099;
+ rtc->rtcdev->ops = &rzn1_rtc_ops;
+ clear_bit(RTC_FEATURE_ALARM, rtc->rtcdev->features);
+ clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, rtc->rtcdev->features);
+
+ devm_pm_runtime_enable(&pdev->dev);
+ ret = pm_runtime_resume_and_get(&pdev->dev);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Ensure the clock counter is enabled.
+ * Set 24-hour mode and possible oscillator offset compensation in SUBU mode.
+ */
+ writel(RZN1_RTC_CTL0_CE | RZN1_RTC_CTL0_AMPM | RZN1_RTC_CTL0_SLSB_SUBU,
+ rtc->base + RZN1_RTC_CTL0);
+
+ /* Disable all interrupts */
+ writel(0, rtc->base + RZN1_RTC_CTL1);
+
+ ret = devm_rtc_register_device(rtc->rtcdev);
+ if (ret)
+ goto dis_runtime_pm;
+
+ return 0;
+
+dis_runtime_pm:
+ pm_runtime_put(&pdev->dev);
+
+ return ret;
+}
+
+static int rzn1_rtc_remove(struct platform_device *pdev)
+{
+ pm_runtime_put(&pdev->dev);
+
+ return 0;
+}
+
+static const struct of_device_id rzn1_rtc_of_match[] = {
+ { .compatible = "renesas,rzn1-rtc" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rzn1_rtc_of_match);
+
+static struct platform_driver rzn1_rtc_driver = {
+ .probe = rzn1_rtc_probe,
+ .remove = rzn1_rtc_remove,
+ .driver = {
+ .name = "rzn1-rtc",
+ .owner = THIS_MODULE,
+ .of_match_table = rzn1_rtc_of_match,
+ },
+};
+module_platform_driver(rzn1_rtc_driver);
+
+MODULE_AUTHOR("Michel Pollet <Michel.Pollet@xxxxxxxxxxxxxx");
+MODULE_AUTHOR("Miquel Raynal <miquel.raynal@xxxxxxxxxxx");
+MODULE_DESCRIPTION("RZ/N1 RTC driver");
+MODULE_LICENSE("GPL");
--
2.27.0
