Re: [PATCH 7/9] ravb: Add support for RZ/V2M

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 5/4/22 5:54 PM, Phil Edworthy wrote:

> RZ/V2M Ethernet is very similar to R-Car Gen3 Ethernet-AVB, though
> some small parts are the same as R-Car Gen2.

   You mean the absence of the interrupt enable/disable registers?

> Other differences are:

   Differences to gen3, you mean?

> * It has separate data (DI), error (Line 1) and management (Line 2) irqs
>   rather than one irq for all three.
> * Instead of using the High-speed peripheral bus clock for gPTP, it has a
>   separate gPTP reference clock.
> 
> Signed-off-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
> Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> ---
> Note: gPTP was tested using an RZ/V2M EVK and an R-Car M3N Salvator-XS
> board, connected with a Summit X440 AVB switch, using ptp4l.

   Oh, that's good! :-)

> ---
>  drivers/net/ethernet/renesas/ravb_main.c | 27 ++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
> index ded87cb51650..03b127faf52f 100644
> --- a/drivers/net/ethernet/renesas/ravb_main.c
> +++ b/drivers/net/ethernet/renesas/ravb_main.c
> @@ -2461,6 +2461,32 @@ static const struct ravb_hw_info ravb_gen2_hw_info = {
>  	.magic_pkt = 1,
>  };
>  
> +static const struct ravb_hw_info ravb_rzv2m_hw_info = {
> +	.rx_ring_free = ravb_rx_ring_free_rcar,
> +	.rx_ring_format = ravb_rx_ring_format_rcar,
> +	.alloc_rx_desc = ravb_alloc_rx_desc_rcar,
> +	.receive = ravb_rx_rcar,
> +	.set_rate = ravb_set_rate_rcar,
> +	.set_feature = ravb_set_features_rcar,
> +	.dmac_init = ravb_dmac_init_rcar,
> +	.emac_init = ravb_emac_init_rcar,
> +	.gstrings_stats = ravb_gstrings_stats,
> +	.gstrings_size = sizeof(ravb_gstrings_stats),
> +	.net_hw_features = NETIF_F_RXCSUM,
> +	.net_features = NETIF_F_RXCSUM,
> +	.stats_len = ARRAY_SIZE(ravb_gstrings_stats),
> +	.max_rx_len = RX_BUF_SZ + RAVB_ALIGN - 1,
> +	.tccr_mask = TCCR_TSRQ0 | TCCR_TSRQ1 | TCCR_TSRQ2 | TCCR_TSRQ3,
> +	.rx_max_buf_size = SZ_2K,

   What about .internal_delay and .tx_counters?

> +	.multi_irqs = 1,
> +	.err_mgmt_irqs = 1,
> +	.gptp = 1,

   Not .ccc_gac?

[...]

MBR. Sergey



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux