Add suffix '-clk' for can and extal clk node names and replace the
clk node names audio_clk{1,2} with clk-{1,2} as per the device
tree specification.
Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
---
v1->v2:
* Replaced clk node names audio_clk{1,2} with clk-{1,2}.
---
arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 19287cccb1f0..8fe585085c58 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -13,14 +13,14 @@ / {
#address-cells = <2>;
#size-cells = <2>;
- audio_clk1: audio_clk1 {
+ audio_clk1: clk-1 {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by boards that provide it */
clock-frequency = <0>;
};
- audio_clk2: audio_clk2 {
+ audio_clk2: clk-2 {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by boards that provide it */
@@ -28,14 +28,14 @@ audio_clk2: audio_clk2 {
};
/* External CAN clock - to be overridden by boards that provide it */
- can_clk: can {
+ can_clk: can-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
/* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
- extal_clk: extal {
+ extal_clk: extal-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
--
2.25.1
