On 13/04/2022 11:48, Krzysztof Kozlowski wrote:
> On Mon, 11 Apr 2022 14:53:45 +0200, Geert Uytterhoeven wrote:
>> HyperFlash devices fail to probe:
>>
>> rpc-if-hyperflash rpc-if-hyperflash: probing of hyperbus device failed
>>
>> In HyperFlash or Octal-SPI Flash mode, the Transfer Data Enable bits
>> (SPIDE) in the Manual Mode Enable Setting Register (SMENR) are derived
>> from half of the transfer size, cfr. the rpcif_bits_set() helper
>> function. However, rpcif_reg_{read,write}() does not take the bus size
>> into account, and does not double all Manual Mode Data Register access
>> sizes when communicating with a HyperFlash or Octal-SPI Flash device.
>>
>> [...]
>
> Applied, thanks!
>
> [1/1] memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode
> commit: 953d7e7cedb49fec97807166be6fa1ecec1cf0c4
>
Amended. This is not a proper tag:
WARNING: Unexpected content after email: 'Lad Prabhakar
<prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> [QSPI]', should be: 'Lad
Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> (QSPI)'
#30:
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> [QSPI]
Best regards,
Krzysztof
