RE: [PATCH] mmc: renesas_sdhi: don't overwrite TAP settings when HS400 tuning is complete

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Wolfram-san,

> From: Wolfram Sang, Sent: Monday, April 4, 2022 8:49 PM
> 
> When HS400 tuning is complete and HS400 is going to be activated, we
> have to keep the current number of TAPs and should not overwrite them
> with a hardcoded value. This was probably a copy&paste mistake when
> upporting HS400 support from the BSP.
> 
> Fixes: 26eb2607fa28 ("mmc: renesas_sdhi: add eMMC HS400 mode support")
> Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
> ---
> 
> Lightly tested with a Renesas R-Car M3N SoC. I think I can't really test
> it because my TAPs are usually stable in my environment. The fix should
> be obvious, though. Shimoda-san, are you happy with it?

Thank you for the patch and test it on your environment. I'm happy with it.
I reviewed this patch, and it looks good to me. So,

Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>

Best regards,
Yoshihiro Shimoda





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux