[PATCH] mmc: renesas_sdhi: special 4tap settings only apply to HS400

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Previous doucmentation was vague, so we included SDR104 for slow SDnH
clock settings. It turns out now, that it is only needed for HS400.

Fixes: bb6d3fa98a41 ("clk: renesas: rcar-gen3: Switch to new SD clock handling")
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/mmc/host/renesas_sdhi_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index 2797a9c0f17d..2a4d314aa027 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -144,9 +144,9 @@ static unsigned int renesas_sdhi_clk_update(struct tmio_mmc_host *host,
 		return clk_get_rate(priv->clk);
 
 	if (priv->clkh) {
+		/* HS400 with 4TAP needs different clock settings */
 		bool use_4tap = priv->quirks && priv->quirks->hs400_4taps;
-		bool need_slow_clkh = (host->mmc->ios.timing == MMC_TIMING_UHS_SDR104) ||
-				      (host->mmc->ios.timing == MMC_TIMING_MMC_HS400);
+		bool need_slow_clkh = host->mmc->ios.timing == MMC_TIMING_MMC_HS400;
 		clkh_shift = use_4tap && need_slow_clkh ? 1 : 2;
 		ref_clk = priv->clkh;
 	}
-- 
2.30.2




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux