[PATCH v3 03/13] pinctrl: stm32: Replace custom code by gpiochip_node_count() call

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Since we have generic function to count GPIO controller nodes
under a given device, there is no need to open code it. Replace
custom code by gpiochip_node_count() call.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Reviewed-by: Fabien Dessenne <fabien.dessenne@xxxxxxxxxxx>
---
 drivers/pinctrl/stm32/pinctrl-stm32.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index 9ed764731570..91b9a64b649e 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -1423,7 +1423,8 @@ int stm32_pctl_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct stm32_pinctrl *pctl;
 	struct pinctrl_pin_desc *pins;
-	int i, ret, hwlock_id, banks = 0;
+	int i, ret, hwlock_id;
+	unsigned int banks;
 
 	if (!np)
 		return -EINVAL;
@@ -1513,10 +1514,7 @@ int stm32_pctl_probe(struct platform_device *pdev)
 		return PTR_ERR(pctl->pctl_dev);
 	}
 
-	for_each_available_child_of_node(np, child)
-		if (of_property_read_bool(child, "gpio-controller"))
-			banks++;
-
+	banks = gpiochip_node_count(dev);
 	if (!banks) {
 		dev_err(dev, "at least one GPIO bank is required\n");
 		return -EINVAL;
-- 
2.35.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux