RE: [PATCH 1/2] dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

> Subject: RE: [PATCH 1/2] dt-bindings: display: bridge: Document RZ/G2L
> MIPI DSI TX bindings
> 
> Hi Rob,
> 
> Thanks for the feedback.
> 
> > Subject: Re: [PATCH 1/2] dt-bindings: display: bridge: Document RZ/G2L
> > MIPI DSI TX bindings
> >
> > On Mon, Mar 14, 2022 at 04:10:02PM +0000, Biju Das wrote:
> > > The RZ/G2L MIPI DSI TX is embedded in the Renesas RZ/G2L family SoC's.
> > > It can operate in DSI mode, with up to four data lanes.
> > >
> > > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > > ---
> > > RFC->v1:
> > >  * Added a ref to dsi-controller.yaml.
> > > RFC:-
> > >  *
> > > ---
> > >  .../bindings/display/bridge/renesas,dsi.yaml  | 146
> > > ++++++++++++++++++
> > >  1 file changed, 146 insertions(+)
> > >  create mode 100644
> > > Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> > > b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> > > new file mode 100644
> > > index 000000000000..74bc3782d230
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.y
> > > +++ am
> > > +++ l
> > > @@ -0,0 +1,146 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > > +---
> > > +$id:
> > > +
> > > +title: Renesas RZ/G2L MIPI DSI Encoder
> > > +
> > > +maintainers:
> > > +  - Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > > +
> > > +description: |
> > > +  This binding describes the MIPI DSI encoder embedded in the
> > > +Renesas
> > > +  RZ/G2L family of SoC's. The encoder can operate in DSI mode with
> > > +up
> > > +  to four data lanes.
> > > +
> > > +allOf:
> > > +  - $ref: ../dsi-controller.yaml#
> >
> > Full path preferred:
> >
> > /schemas/display/dsi-controller.yaml#
> 
> OK. Will fix this.
> 
> >
> > > +
> > > +properties:
> > > +  compatible:
> > > +    enum:
> > > +      - renesas,rzg2l-mipi-dsi # RZ/G2L and RZ/V2L
> > > +
> > > +  reg:
> > > +    items:
> > > +      - description: Link register
> > > +      - description: D-PHY register
> >
> > D-PHY is not a separate block?

Got it. I will model as a single block.

Regards,
Biju

> 
> Basically D-PHY is integrated inside MIPI-DSI Tx module.
> 
> MIPI-DSI Tx module consists of MIPI DSI-2 Host controller (LINK) and MIPI
> D-PHY Tx(D-PHY).
> 
> That is the reason I have modelled like this.
> 
> Is this model ok or am I missing something here? Please let me know.
> 
> >
> > > +
> > > +  clocks:
> > > +    items:
> > > +      - description: DSI D-PHY PLL multiplied clock
> > > +      - description: DSI D-PHY system clock
> > > +      - description: DSI AXI bus clock
> > > +      - description: DSI Register access clock
> > > +      - description: DSI Video clock
> > > +      - description: DSI D_PHY Escape mode Receive clock
> >
> > D-PHY
> OK, Will fix this.
> 
> Regards,
> Biju
> >
> > > +
> > > +  clock-names:
> > > +    items:
> > > +      - const: pllclk
> > > +      - const: sysclk
> > > +      - const: aclk
> > > +      - const: pclk
> > > +      - const: vclk
> > > +      - const: lpclk
> > > +
> > > +  power-domains:
> > > +    maxItems: 1
> > > +
> > > +  resets:
> > > +    items:
> > > +      - description: MIPI_DSI_CMN_RSTB
> > > +      - description: MIPI_DSI_ARESET_N
> > > +      - description: MIPI_DSI_PRESET_N
> > > +
> > > +  reset-names:
> > > +    items:
> > > +      - const: rst
> > > +      - const: arst
> > > +      - const: prst
> > > +
> > > +  ports:
> > > +    $ref: /schemas/graph.yaml#/properties/ports
> > > +
> > > +    properties:
> > > +      port@0:
> > > +        $ref: /schemas/graph.yaml#/properties/port
> > > +        description: Parallel input port
> > > +
> > > +      port@1:
> > > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > > +        unevaluatedProperties: false
> > > +        description: DSI output port
> > > +
> > > +        properties:
> > > +          endpoint:
> > > +            $ref: /schemas/media/video-interfaces.yaml#
> > > +            unevaluatedProperties: false
> > > +
> > > +            properties:
> > > +              data-lanes:
> > > +                minItems: 1
> > > +                maxItems: 4
> > > +
> > > +            required:
> > > +              - data-lanes
> > > +
> > > +    required:
> > > +      - port@0
> > > +      - port@1
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - clocks
> > > +  - clock-names
> > > +  - power-domains
> > > +  - resets
> > > +  - reset-names
> > > +  - ports
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > +  - |
> > > +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> > > +
> > > +    dsi0: dsi@10860000 {
> > > +        compatible = "renesas,rzg2l-mipi-dsi";
> > > +        reg = <0x10860000 0x10000>,
> > > +              <0x10850000 0x10000>;
> > > +        power-domains = <&cpg>;
> > > +        clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
> > > +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
> > > +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
> > > +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
> > > +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
> > > +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
> > > +        clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk",
> > "lpclk";
> > > +        resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
> > > +                 <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
> > > +                 <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
> > > +        reset-names = "rst", "arst", "prst";
> > > +
> > > +        ports {
> > > +            #address-cells = <1>;
> > > +            #size-cells = <0>;
> > > +
> > > +            port@0 {
> > > +                reg = <0>;
> > > +                dsi0_in: endpoint {
> > > +                    remote-endpoint = <&du_out_dsi0>;
> > > +                };
> > > +            };
> > > +
> > > +            port@1 {
> > > +                reg = <1>;
> > > +                dsi0_out: endpoint {
> > > +                    data-lanes = <1 2 3 4>;
> > > +                    remote-endpoint = <&adv7535_in>;
> > > +                };
> > > +            };
> > > +        };
> > > +    };
> > > +...
> > > --
> > > 2.17.1
> > >
> > >




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux