The function was just renamed to be easier understandable. No functional
change.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
RFC, please do not apply yet
drivers/net/phy/broadcom.c | 2 +-
drivers/net/phy/mdio_bus.c | 4 ++--
drivers/net/phy/mdio_device.c | 2 +-
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 3c683e0e40e9..26a8665ab245 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -446,7 +446,7 @@ static int bcm54xx_resume(struct phy_device *phydev)
/* Upon exiting power down, the PHY remains in an internal reset state
* for 40us
*/
- fsleep(40);
+ usleep_autoyield(40);
/* Issue a soft reset after clearing the power down bit
* and before doing any other configuration.
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 58d602985877..dfd4c2e1e1e3 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -570,10 +570,10 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
return err;
} else if (gpiod) {
bus->reset_gpiod = gpiod;
- fsleep(bus->reset_delay_us);
+ usleep_autoyield(bus->reset_delay_us);
gpiod_set_value_cansleep(gpiod, 0);
if (bus->reset_post_delay_us > 0)
- fsleep(bus->reset_post_delay_us);
+ usleep_autoyield(bus->reset_post_delay_us);
}
if (bus->reset) {
diff --git a/drivers/net/phy/mdio_device.c b/drivers/net/phy/mdio_device.c
index 250742ffdfd9..9941a38c3631 100644
--- a/drivers/net/phy/mdio_device.c
+++ b/drivers/net/phy/mdio_device.c
@@ -132,7 +132,7 @@ void mdio_device_reset(struct mdio_device *mdiodev, int value)
d = value ? mdiodev->reset_assert_delay : mdiodev->reset_deassert_delay;
if (d)
- fsleep(d);
+ usleep_autoyield(d);
}
EXPORT_SYMBOL(mdio_device_reset);
--
2.34.1
