According to HW documentation 2.20 onwards, drive-strength is introduced
to r8a77990. Add it to the pinctrl driver.
Signed-off-by: LUU HOAI <hoai.luu.ub@xxxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
Original BSP commit: f479c5a4e5e5 ("pinctrl: renesas: r8a77990: Add driver-strength for R8A77990")
However, this was incomplete and missed 6 pins of table 6D.6 which were
on a separate page. Adding them simplifies PORT_GP updates a lot.
However, a preparational patch is needed then which is patch 1 of this
series.
drivers/pinctrl/renesas/pfc-r8a77990.c | 38 ++++++++++++++++++++++++--
1 file changed, 36 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/renesas/pfc-r8a77990.c b/drivers/pinctrl/renesas/pfc-r8a77990.c
index f44c7da3ec16..cc825100f2fe 100644
--- a/drivers/pinctrl/renesas/pfc-r8a77990.c
+++ b/drivers/pinctrl/renesas/pfc-r8a77990.c
@@ -22,12 +22,12 @@
PORT_GP_CFG_18(0, fn, sfx, CFG_FLAGS), \
PORT_GP_CFG_23(1, fn, sfx, CFG_FLAGS), \
PORT_GP_CFG_26(2, fn, sfx, CFG_FLAGS), \
- PORT_GP_CFG_12(3, fn, sfx, CFG_FLAGS | SH_PFC_PIN_CFG_IO_VOLTAGE), \
+ PORT_GP_CFG_12(3, fn, sfx, CFG_FLAGS | SH_PFC_PIN_CFG_IO_VOLTAGE | SH_PFC_PIN_CFG_DRIVE_STRENGTH), \
PORT_GP_CFG_1(3, 12, fn, sfx, CFG_FLAGS), \
PORT_GP_CFG_1(3, 13, fn, sfx, CFG_FLAGS), \
PORT_GP_CFG_1(3, 14, fn, sfx, CFG_FLAGS), \
PORT_GP_CFG_1(3, 15, fn, sfx, CFG_FLAGS), \
- PORT_GP_CFG_11(4, fn, sfx, CFG_FLAGS | SH_PFC_PIN_CFG_IO_VOLTAGE), \
+ PORT_GP_CFG_11(4, fn, sfx, CFG_FLAGS | SH_PFC_PIN_CFG_IO_VOLTAGE | SH_PFC_PIN_CFG_DRIVE_STRENGTH), \
PORT_GP_CFG_20(5, fn, sfx, CFG_FLAGS), \
PORT_GP_CFG_9(6, fn, sfx, CFG_FLAGS), \
PORT_GP_CFG_1(6, 9, fn, sfx, SH_PFC_PIN_CFG_PULL_UP), \
@@ -5104,6 +5104,39 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
{ },
};
+static const struct pinmux_drive_reg pinmux_drive_regs[] = {
+ { PINMUX_DRIVE_REG("DRVCTRL8", 0xe6060320) {
+ { RCAR_GP_PIN(3, 0), 18, 2 }, /* SD0_CLK */
+ { RCAR_GP_PIN(3, 1), 15, 2 }, /* SD0_CMD */
+ { RCAR_GP_PIN(3, 2), 12, 2 }, /* SD0_DAT0 */
+ { RCAR_GP_PIN(3, 3), 9, 2 }, /* SD0_DAT1 */
+ { RCAR_GP_PIN(3, 4), 6, 2 }, /* SD0_DAT2 */
+ { RCAR_GP_PIN(3, 5), 3, 2 }, /* SD0_DAT3 */
+ { RCAR_GP_PIN(3, 6), 0, 2 }, /* SD1_CLK */
+ } },
+ { PINMUX_DRIVE_REG("DRVCTRL9", 0xe6060324) {
+ { RCAR_GP_PIN(3, 7), 29, 2 }, /* SD1_CMD */
+ { RCAR_GP_PIN(3, 8), 26, 2 }, /* SD1_DAT0 */
+ { RCAR_GP_PIN(3, 9), 23, 2 }, /* SD1_DAT1 */
+ { RCAR_GP_PIN(3, 10), 20, 2 }, /* SD1_DAT2 */
+ { RCAR_GP_PIN(3, 11), 17, 2 }, /* SD1_DAT3 */
+ { RCAR_GP_PIN(4, 0), 14, 2 }, /* SD3_CLK */
+ { RCAR_GP_PIN(4, 1), 11, 2 }, /* SD3_CMD */
+ { RCAR_GP_PIN(4, 2), 8, 2 }, /* SD3_DAT0 */
+ { RCAR_GP_PIN(4, 3), 5, 2 }, /* SD3_DAT1 */
+ { RCAR_GP_PIN(4, 4), 2, 2 }, /* SD3_DAT2 */
+ } },
+ { PINMUX_DRIVE_REG("DRVCTRL10", 0xe6060328) {
+ { RCAR_GP_PIN(4, 5), 29, 2 }, /* SD3_DAT3 */
+ { RCAR_GP_PIN(4, 6), 26, 2 }, /* SD3_DAT4 */
+ { RCAR_GP_PIN(4, 7), 23, 2 }, /* SD3_DAT5 */
+ { RCAR_GP_PIN(4, 8), 20, 2 }, /* SD3_DAT6 */
+ { RCAR_GP_PIN(4, 9), 17, 2 }, /* SD3_DAT7 */
+ { RCAR_GP_PIN(4, 10), 14, 2 }, /* SD3_DS */
+ } },
+ { },
+};
+
enum ioctrl_regs {
POCCTRL0,
TDSELCTRL,
@@ -5387,6 +5420,7 @@ const struct sh_pfc_soc_info r8a77990_pinmux_info = {
ARRAY_SIZE(pinmux_functions.automotive),
.cfg_regs = pinmux_config_regs,
+ .drive_regs = pinmux_drive_regs,
.bias_regs = pinmux_bias_regs,
.ioctrl_regs = pinmux_ioctrl_regs,
--
2.30.2
