[PATCH v4 0/3] drm/bridge: ti-sn65dsi86: Support non-eDP DisplayPort connectors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Implement support for non eDP connectors on the TI-SN65DSI86 bridge, and
provide IRQ based hotplug detect to identify when the connector is
present.

no-hpd is extended to be the default behaviour for non DisplayPort
connectors.

This series is based upon Sam Ravnborgs and Rob Clarks series [0] to
support DRM_BRIDGE_STATE_OPS and NO_CONNECTOR support on the SN65DSI86,
however some extra modifications have been made on the top of Sam's
series to fix compile breakage and the NO_CONNECTOR support.

A full branch with these changes is available at [1]

As in v3, I have not taken ownership of the patches at [0], so it would
be good to hear if Sam has any plans to revive or push this series.
These patches are not expected to be integrated without [0].

[0] https://lore.kernel.org/all/20220206154405.1243333-1-sam@xxxxxxxxxxxx/
[1] git://git.kernel.org/pub/scm/linux/kernel/git/kbingham/rcar.git
    branch: kbingham/drm-misc/next/sn65dsi86/hpd

Kieran Bingham (1):
  drm/bridge: ti-sn65dsi86: Support hotplug detection

Laurent Pinchart (2):
  drm/bridge: ti-sn65dsi86: Support DisplayPort (non-eDP) mode
  drm/bridge: ti-sn65dsi86: Implement bridge connector operations

 drivers/gpu/drm/bridge/ti-sn65dsi86.c | 191 ++++++++++++++++++++++++--
 1 file changed, 176 insertions(+), 15 deletions(-)

-- 
2.32.0




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux