Re: [RFC PATCH v4 0/5] Renesas RZ/G2L IRQC support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Marc,

On Thu, Mar 17, 2022 at 9:23 AM Marc Zyngier <maz@xxxxxxxxxx> wrote:
>
> On Thu, 17 Mar 2022 08:46:14 +0000,
> Andy Shevchenko <andy.shevchenko@xxxxxxxxx> wrote:
> >
> > On Thu, Mar 17, 2022 at 5:43 AM Lad Prabhakar
> > <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
> > >
> > > Hi All,
> > >
> > > The RZ/G2L Interrupt Controller is a front-end for the GIC found on
> > > Renesas RZ/G2L SoC's with below pins:
> > > - IRQ sense select for 8 external interrupts, mapped to 8 GIC SPI interrupts
> > > - GPIO pins used as external interrupt input pins out of GPIOINT0-122 a
> > >   maximum of only 32 can be mapped to 32 GIC SPI interrupts,
> > > - NMI edge select.
> > >
> > What I want to know now is whether it is going to collide with Marc's
> > series about GPIO IRQ chip constification?
>
> Probably, but the current scheme will still be alive for some time
> (you'll need a couple of cycles to sort out all the drivers).
>
Ouch, thanks for letting me know. BTW there are a couple of changes to
GPIO core which you have to review (this was missed in the previous
version).

Cheers,
Prabhakar

> Worse case, this can be fixed at merge time.
>
>         M.
>
> --
> Without deviation from the norm, progress is not possible.



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux