Re: [RFC PATCH v4 1/5] dt-bindings: interrupt-controller: Add Renesas RZ/G2L Interrupt Controller

[Krzysztof Kozlowski <krzk@xxxxxxxxxx>]

On 17/03/2022 02:24, Lad Prabhakar wrote:
> Add DT bindings for the Renesas RZ/G2L Interrupt Controller.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
>  .../renesas,rzg2l-irqc.yaml                   | 131 ++++++++++++++++++
>  1 file changed, 131 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
> new file mode 100644
> index 000000000000..a14492ec9235
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
> @@ -0,0 +1,131 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interrupt-controller/renesas,rzg2l-irqc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas RZ/G2L (and alike SoC's) Interrupt Controller (IA55)
> +
> +maintainers:
> +  - Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> +  - Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> +
> +description: |
> +  IA55 performs various interrupt controls including synchronization for the external
> +  interrupts of NMI, IRQ, and GPIOINT and the interrupts of the built-in peripheral
> +  interrupts output by each IP. And it notifies the interrupt to the GIC
> +    - IRQ sense select for 8 external interrupts, mapped to 8 GIC SPI interrupts
> +    - GPIO pins used as external interrupt input pins, mapped to 32 GIC SPI interrupts
> +    - NMI edge select (NMI is not treated as NMI exception and supports fall edge and
> +      stand-up edge detection interrupts)
> +
> +allOf:
> +  - $ref: /schemas/interrupt-controller.yaml#
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - renesas,r9a07g044-irqc    # RZ/G2L
> +      - const: renesas,rzg2l-irqc
> +
> +  '#interrupt-cells':
> +    const: 2
> +
> +  '#address-cells':
> +    const: 0
> +
> +  interrupt-controller: true
> +
> +  reg:
> +    maxItems: 1> +
> +  interrupts:
> +    maxItems: 41
> +
> +  clocks:
> +    maxItems: 2
> +
> +  clock-names:
> +    items:
> +      - const: clk
> +      - const: pclk
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - '#interrupt-cells'
> +  - '#address-cells'
> +  - interrupt-controller
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - resets
> +
> +additionalProperties: false

This should be rather unevaluatedProperties and remove
interrupt-controller:true from properties.

> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> +
> +    irqc: interrupt-controller@110a0000 {
> +            compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc";
> +            #interrupt-cells = <2>;
> +            #address-cells = <0>;
> +            interrupt-controller;
> +            reg = <0x110a0000 0x10000>;

Put the reg after compatible in DTS code. The ordering of properties in
bindings is a bit odd, but I wasn't following order by myself, so cannot
complain. :)



Best regards,
Krzysztof