Re: [PATCH v6 1/2] PCI: rcar: Finish transition to L1 state in rcar_pcie_config_access()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 12 Mar 2022 22:23:48 +0100, marek.vasut@xxxxxxxxx wrote:
> From: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
> 
> In case the controller is transitioning to L1 in rcar_pcie_config_access(),
> any read/write access to PCIECDR triggers asynchronous external abort. This
> is because the transition to L1 link state must be manually finished by the
> driver. The PCIe IP can transition back from L1 state to L0 on its own.
> 
> [...]

Re-built pci/rcar with this series, I shall ask Bjorn to pull it
again, we should be in time for v5.18.

[1/2] PCI: rcar: Finish transition to L1 state in rcar_pcie_config_access()
      https://git.kernel.org/lpieralisi/pci/c/84b5761462
[2/2] PCI: rcar: Use PCI_SET_ERROR_RESPONSE after read which triggered an exception
      https://git.kernel.org/lpieralisi/pci/c/6e36203bc1

Thanks,
Lorenzo



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux