[PATCH 1/2] dt-bindings: drm: bridge: adi,adv7533: Document adi,disable-lanes-override property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Renesas RZ/{G2L,V2L} platforms changing the lanes from 4 to 3 at
lower frequencies causes display instability. On such platforms, it
is better to avoid switching lanes from 4 to 3 as it needs different
set of PLL parameter constraints to make the display stable with 3
lanes.

This patch introduces 'adi,disable-lanes-override' property to disable
lane switching at lower frequencies.

Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
 .../devicetree/bindings/display/bridge/adi,adv7533.yaml      | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
index f36209137c8a..2dc378039d21 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
@@ -84,6 +84,11 @@ properties:
       timings for HDMI output.
     type: boolean
 
+  adi,disable-lanes-override:
+    description:
+      Disables the overriding lanes at lower frequencies.
+    type: boolean
+
   adi,dsi-lanes:
     description: Number of DSI data lanes connected to the DSI host.
     $ref: /schemas/types.yaml#/definitions/uint32
-- 
2.17.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux