Register the CAN device only when all the necessary initialization
is completed. This patch makes sure all the data structures and locks are
initialized before registering the CAN device.
Reported-by: Pavel Machek <pavel@xxxxxxx>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
drivers/net/can/rcar/rcar_canfd.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
index 3ad3a6f6a1dd..8c378b20b2aa 100644
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -1783,15 +1783,15 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch,
netif_napi_add(ndev, &priv->napi, rcar_canfd_rx_poll,
RCANFD_NAPI_WEIGHT);
+ spin_lock_init(&priv->tx_lock);
+ devm_can_led_init(ndev);
+ gpriv->ch[priv->channel] = priv;
err = register_candev(ndev);
if (err) {
dev_err(&pdev->dev,
"register_candev() failed, error %d\n", err);
goto fail_candev;
}
- spin_lock_init(&priv->tx_lock);
- devm_can_led_init(ndev);
- gpriv->ch[priv->channel] = priv;
dev_info(&pdev->dev, "device registered (channel %u)\n", priv->channel);
return 0;
--
2.17.1
