[PATCH 2/4] arm64: dts: renesas: rzg2lc-smarc: Add macros for DIP-Switch settings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



RZ/G2LC SoM uses DIP-SWitch SW1 for various pin multiplexing functions.

This patch describes DIP-SWitch SW1 settings on SoM and adds the
corresponding macros for enabling pinmux functionality on RZ/G2LC
SMARC EVK.

Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
 .../boot/dts/renesas/r9a07g044c2-smarc.dts    |  4 +--
 arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi | 36 +++++++++++++++++++
 2 files changed, 37 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi

diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
index 18818536a54f..f68491c56fff 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
@@ -7,9 +7,7 @@
 
 /dts-v1/;
 #include "r9a07g044c2.dtsi"
-#include "rzg2lc-smarc-som.dtsi"
-#include "rzg2lc-smarc-pinfunction.dtsi"
-#include "rz-smarc-common.dtsi"
+#include "rzg2lc-smarc.dtsi"
 
 / {
 	model = "Renesas SMARC EVK based on r9a07g044c2";
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
new file mode 100644
index 000000000000..a998b4dbf35c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC SMARC EVK parts
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/*
+ * DIP-Switch SW1 setting on SoM
+ * 1 : High; 0: Low
+ * SW1-2 : SW_SD0_DEV_SEL	(1: eMMC; 0: uSD)
+ * SW1-3 : SW_SCIF_CAN		(1: CAN1; 0: SCIF1)
+ * SW1-4 : SW_RSPI_CAN		(1: CAN1; 0: RSPI1)
+ * SW1-5 : SW_I2S0_I2S1		(1: I2S2 (HDMI audio); 0: I2S0)
+ * Please change below macros according to SW1 setting
+ */
+
+#define SW_SCIF_CAN	0
+#if (SW_SCIF_CAN)
+/* Due to HW routing, SW_RSPI_CAN is always 0 when SW_SCIF_CAN is set to 1 */
+#define SW_RSPI_CAN	0
+#else
+/* Please set SW_RSPI_CAN. Default value is 1 */
+#define SW_RSPI_CAN	1
+#endif
+
+#if (SW_SCIF_CAN & SW_RSPI_CAN)
+#error "Can not set 1 to both SW_SCIF_CAN and SW_RSPI_CAN due to Hardware."
+#endif
+
+#include "rzg2lc-smarc-som.dtsi"
+#include "rzg2lc-smarc-pinfunction.dtsi"
+#include "rz-smarc-common.dtsi"
-- 
2.17.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux