Re: [PATCH] media: dt-bindings: media: renesas,csi2: Update data-lanes property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jacopo,

Thank you for the review.

On Mon, Jan 17, 2022 at 8:11 AM Jacopo Mondi <jacopo@xxxxxxxxxx> wrote:
>
> Hello Prabhakar,
>
> On Thu, Jan 13, 2022 at 10:32:14AM +0000, Lad Prabhakar wrote:
> > CSI-2 (CSI4LNK0) on R-Car and RZ/G2 supports 4-lane mode which is already
> > handled by rcar-csi2.c driver. This patch updates the data-lanes property
> > to describe the same.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > ---
> >  .../devicetree/bindings/media/renesas,csi2.yaml          | 9 ++++++++-
> >  1 file changed, 8 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
> > index e6a036721082..064a0a4c5737 100644
> > --- a/Documentation/devicetree/bindings/media/renesas,csi2.yaml
> > +++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
> > @@ -67,7 +67,14 @@ properties:
> >                  maxItems: 1
> >
> >                data-lanes:
> > -                maxItems: 1
> > +                items:
> > +                  minItems: 1
> > +                  maxItems: 4
> > +                  items:
> > +                    - const: 1
> > +                    - const: 2
> > +                    - const: 3
> > +                    - const: 4
>
> Seeing "maxItems: 1" there confuses me too, as the property is an
> array of data-lanes, but I'm afraid your change does not what you
> intend as it would allow you to specify the number of data lanes as an
> integer rather than as an array.
>
Agreed, what do you think of the below instead?

            properties:
              data-lanes:
                minItems: 1
                maxItems: 4
                items:
                  maximum: 4

The above should handle all the possible mix and match of the lanes.

> I think it would probably be correct to set
>
>                 data-lanes: true
>
> (maybe maxItems: 1 is correct already)
>
> And restrict the number of valid combinations in the board DTS file
> with a construct like:
>
>     data-lanes:
>       oneOf:
>         - items:
>             - const: 1
>             - const: 2
>             - const: 3
>             - const: 4
>         - items:
>             - const: 1
>             - const: 2
>
I haven't come across dts files having such constraints is it allowed,
could you point me to a example.

Cheers,
Prabhakar



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux