Re: [PATCH 2/3] arm64: dts: renesas: r8a77961: Add lvds0 device node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
   					};

Endpoints must have a remote-endpoint property. Let's drop the endpoint
here and keep the port only, the endpoint can be declared in board
files.

If you're fine with this change I can make it when applying the patch.

This empty endpoint is currently defined in dtsi files for other r-car
gen3 SoCs.

Goal here is to define lvds0_out label that is then used in extension
board dtsi files to link to the port.

In this patch I just used the same approach as in files laying nearby.

If this approach is not appropriate, then perhaps need to fix it in
files for all SoCs, to make it possible for extension board dtsi to be
compatible with all of them.

I'm writing a patch to drop those right now :-) I'll CC you.

This is not the only place where rcag-gen3 dtsi files are using empty-endpoint pattern.

du rgb port is defined in the same way.

And, I've submitted a patch some weeks ago [1] that hooked into that.

[1] https://lore.kernel.org/lkml/20211225115308.2152364-1-nikita.yoush@xxxxxxxxxxxxxxxxxx/

Since there was no reply, I am about to resubmit it.
But, perhaps need to do something with empty-endpoint pattern first?

Nikita



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux