[RFC 28/28] arm64: dts: renesas: rzg2l-smarc: Enable Display on carrier board

[Biju Das <biju.das.jz@xxxxxxxxxxxxxx>]

Enable display interface on RZ/G2L SMARC EVK.

Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi | 61 ++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
index 6f2a8bdfa225..3851f5b4c855 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
@@ -37,6 +37,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+
 	audio_mclock: audio_mclock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -107,6 +118,23 @@
 	};
 };
 
+&dsi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			dsi0_out: endpoint {
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&adv7535_in>;
+			};
+		};
+	};
+};
+
+&du {
+	status = "okay";
+};
+
 &ehci0 {
 	dr_mode = "otg";
 	status = "okay";
@@ -133,6 +161,39 @@
 	pinctrl-names = "default";
 
 	status = "okay";
+
+	adv7535: hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>;
+
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		a2vdd-supply = <&reg_1p8v>;
+		v3p3-supply = <&reg_3p3v>;
+		v1p2-supply = <&reg_1p8v>;
+
+		adi,dsi-lanes = <4>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
 };
 
 &i2c3 {
-- 
2.17.1