[PATCH v2.1 03/11] dt-bindings: media: i2c: max9286: Add property to select bus width

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The GMSL serial data bus width is normally selected by the BWS pin, but
it can also be configured by software. Add a DT property that allows
overriding the value of the BWS-selected bus width to support systems
whose BWS pin doesn't result in the correct value.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
Reviewed-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
---
Changes since v2:

- Specify the property type
---
 .../devicetree/bindings/media/i2c/maxim,max9286.yaml      | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
index 438381eb3cde..c6d92f51aa5a 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
@@ -50,6 +50,14 @@ properties:
   '#gpio-cells':
     const: 2
 
+  maxim,bus-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 24, 27, 32 ]
+    description: |
+      The GMSL serial data bus width. This setting is normally controlled by
+      the BWS pin, but may be overridden with this property. The value must
+      match the configuration of the remote serializers.
+
   maxim,i2c-remote-bus-hz:
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [ 8470, 28300, 84700, 105000, 173000, 339000, 533000, 837000 ]
-- 
Regards,

Laurent Pinchart





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux